| From | Message |
Matt
Dodge Dakota
JOIN HERE
8/28/2003
08:35:29
|
 Subject: Losing Turn with control arms
IP: Logged
Message:
Hey I found a helluva a buy on a DJM 2/3 kit that has 2" control arms and 2" hangers, 1" blocks along with shocks. I know I would lose alot of my turning if I put these control arms on, but is there anyway I'd be able to get when they are on besides taking them off?? Like any special trimming or anything?? Thanks,
-Matt
|
BlackDak20
Dodge Dakota
JOIN HERE
8/28/2003
16:51:11
| RE: Losing Turn with control arms
IP: Logged
Message:
Your in luck. There is a way to get most if not all your steering back. On the arm there is a tab that your steering knuckle will hit. Its easy to see, on the backside of the arm. Just take a grinder to it and grind it down a bit on both sides equaly. I have the 3" arms and i have no steering problems at all anymore.
Take it easy and good luck with that
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
