| From | Message |
dan
Dodge Dakota
JOIN HERE
8/03/2003
16:04:48
|
 Subject: rear 4" drop ideas
IP: Logged
Message:
Looking for a true 4" drop in the rear, any odeas? Oh, it's an R/T.
Dan
|
Matt
Dodge Dakota
JOIN HERE
8/03/2003
16:47:12
|  RE: rear 4
IP: Logged
Message:
Here's a full 3" drop in the front from the stock R/T height and a full 4" in the rear from the stock R/T height. Needs 1" blocks in the rear for a level look. The total drop from the stock Dakota Sport, SLT, and SXT height is a 4/5.
|
kotadude21
Dodge Dakota
JOIN HERE
8/06/2003
01:19:04
| RE: rear 4
IP: Logged
Message:
that truck doesn't look dropped at all
|
BlackDak20
Dodge Dakota
JOIN HERE
8/06/2003
02:59:43
| RE: rear 4
IP: Logged
Message:
Do you want the drop from a slt/sport or from where your r/t sits right now. The r/t is an inch lower from the factory. If you wanted it from the slt/sport you could put a 3" block and that would give you 4" from a slt/sport. On the r/t i dont know if its the same shackle and hanger as the slt/sport and they use a different leaf or if the hangers are higher to get that 1". Find out and if its the leaf you could do beltech 4" hangers. If its the hangers thats different you could find sumone that wants the r/t leafs and trade them for the stock ones and then use the djm 5" hangers and that would give you full 4".
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
