| From | Message |
Kev
Dodge Dakota
JOIN HERE
7/04/2003
03:09:52
|
 Subject: Check out My 2000 Dak
IP: Logged
Message:
http://www.sounddomain.com/member_pages/view_page.pl?page_id=380685
|
low4c
Dodge Dakota
JOIN HERE
7/04/2003
14:56:10
|  RE: Check out My 2000 Dak
IP: Logged
Message:
right on like the pics!! lookin good. yeah i had major fitting issues w/ my grill, tryin to insert was a b****. but it looks awesome! but u said you have a 4/5 drop? or is that what ur goinggg to put on it, maybe i read it wrong, just cause it doesnt look like it. again probably read it wrong. but nice trk, very clean.
|
Kev...
Dodge Dakota
JOIN HERE
7/04/2003
17:24:25
| RE: Check out My 2000 Dak
IP: Logged
Message:
4/5 is what I am Going to Put on... I was going to go 4/6 but I not ready to C-section my frame yet....
|
TOMMY
Dodge Dakota
JOIN HERE
7/04/2003
17:48:56
| RE: Check out My 2000 Dak
IP: Logged
Message:
JUST WHAT WE NEED A ANOTHER FRICKIN RED DAK
|
kotadude21
Dodge Dakota
JOIN HERE
7/04/2003
18:59:22
| RE: Check out My 2000 Dak
IP: Logged
Message:
man you could put that kit on yourself and save some major $$$ , I was lucky enough to be able to borrow a lift and put on c. arms and leaf springs in about 6 hrs
It was my first time also
for the money you would save I'd rather do it on jackstands in my garage w/ a buddy
brent
|
tommy
Dodge Dakota
JOIN HERE
7/05/2003
02:43:09
|  RE: Check out My 2000 Dak
IP: Logged
Message:
Please disregard the statments made by an imposter using my email address, It was stolen by a user by the name BILLY BOB who posted a pic that you click and he steals your email address and all your personal files.
|
ttt
Dodge Dakota
JOIN HERE
7/05/2003
15:11:53
| RE: Check out My 2000 Dak
IP: Logged
Message:
ttt
|
Kev...
Dodge Dakota
JOIN HERE
7/14/2003
04:24:55
| RE: Check out My 2000 Dak
IP: Logged
Message:
I dont have access to a torch for the rivits in the rear.. I do how ever have a friend that has some air tools and used to work at a dodge dealership... He says the control arms and springs are real easy, its the droping of the gas tank and removing the 16 rivits in the rear that is a bitch... I looked around town and the cheapest i found to do the rear only was $200. and thats because the gas tank has to be dropped... Is there Anybody that lives around the San Antonio Tx Area that could help me out??
Basically I need a Torch and An air compressor for my air tools and I got everything else...
|
pappie1
Dodge Dakota
JOIN HERE
7/15/2003
05:49:25
| RE: Check out My 2000 Dak
IP: Logged
Message:
drop gastank???? torch rivets?????? Just get a 9/16 drill bit and drill the heads off and punch them through with a air hammer. Just pilot drill with a 1/16, drill it up twice to 9/16, and punch it. If it doesn't punch..... drill a little more and try again.
Going back to my 6 years of metal training, if you heat up the area with a torch to "burn" the rivets off, It will heat treat the metal and mak it brittle. I'm sure that it won't matter to the frame but I personally would just cold work the area (drilling)
|
Us
Dodge Dakota
JOIN HERE
7/27/2003
18:12:45
|  RE: Check out My 2000 Dak
IP: Logged
Message:
Removing the bed and then the tank then torching the rivits is a lot easier than trying to drill out all 16 rivits. Thats alot of drilling and hard labor.. Air tools makes the removing of the bed and tank real easy...
|
2003 Dakota
Dodge Dakota
JOIN HERE
7/31/2003
03:05:32
|  RE: Check out My 2000 Dak
IP: Logged
Message:
Nice Truck.... It will look so much sweeter when its dropped....
|
stan
Dodge Dakota
JOIN HERE
8/11/2003
17:08:17
| RE: Check out My 2000 Dak
IP: Logged
Message:
Got any new pics of your truck lowered yet??
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
