| From | Message |
Ray Kolbe
Dodge Dakota
JOIN HERE
6/22/2003
20:29:32
|
 Subject: '93 dak drop questions
IP: Logged
Message:
Ok, So....I think i posted this before, but not in this forum.
Anyways, Im in the process of getting stuff to drop my dakota 3 inches. I currently have 15" tires and Im at stock height.
For the front I believe all I would need is sprngs and shocks, right? Would I need to do anything with the arms, ball joints, or the spindle???
For the rear Im getting blocks, there shouldnt be any cleanance issues eh?
Will my tires rub my wheel wells at all? I have a tight budget also....so quality, but not too expensive is always good.
|
janesy
Dodge Dakota
JOIN HERE
6/23/2003
12:25:20
| RE: '93 dak drop questions
IP: Logged
Message:
i dropped my 93, 2/3 and no rubbing or any misalighnment. You will have to do the shocks for sure in the front, they rarely come out unharmed.
|
Jeremy
Dodge Dakota
JOIN HERE
6/23/2003
13:01:42
| RE: '93 dak drop questions
IP: Logged
Message:
With low profile 15 inch tires (50 series and below) your u-bolts will be very low to the ground. You will definitely have to cut any excess length off. I had 16's with a 50 series and I got away with a 4 inch block for a long time.
|
Ray Kolbe
Dodge Dakota
JOIN HERE
6/23/2003
16:47:13
| RE: '93 dak drop questions
IP: Logged
Message:
Yea, my tires are definitly not low pro...im not good with tire sizes, but...heres a link (pic) of my rear tire:
http://abacus.bates.edu/~rkolbe/Rear_Wheel_Clean.jpg
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
