| From | Message |
dodgenut
Dodge Dakota
JOIN HERE
2/07/2002
03:17:06
|
 Subject: What system to lower
IP: Logged
Message:
Hey have 2000 dakota look in mags and see whole system to lower truck are they any good or better off buying everything seperly. wonting 3 and 5 inch drop . dont have the cash for bags.so any input would help. thanks
|
ctdak
Dodge Dakota
JOIN HERE
2/07/2002
17:50:49
|  RE: What system to lower
IP: Logged
Message:
You could go many different ways with the
lowering. 2" A-arms and a 1" spring in front and a
flip kit in the rear. Or 3" leafs and blocks or
shacks and hangers with the springs, ect. Get the
picture. You will most likely have to use an a-arm
for the front if you go 3", for clearance and
ridablity. Just don't use an AIM products, there
not reliable. I have the Western Chassis a-arm and
1" spring, hotchkis leafs and swaybars from
bell-tech, but I am weighting 2 more weeks to
install. I just want to make sure the winter is
not coming back. One warning, it's still going to
cost you a buck or two. Don't go cheap on
suspension parts, especially if you beat on them
like I do.
|
dodgenut
Dodge Dakota
JOIN HERE
2/10/2002
00:09:10
| RE: What system to lower
IP: Logged
Message:
thanks for the info
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
