| From | Message |
Kota 360 R/T
Dodge Dakota
JOIN HERE
1/22/2002
02:02:34
|
 Subject: Best way to drop front end
IP: Logged
Message:
I have an R/T that I want to lower a full 2" in the front. Would I be better off using a 2" lowering A arm or a 3" drop coil?
|
brianldm
Dodge Dakota
JOIN HERE
1/22/2002
16:55:12
| RE: Best way to drop front end
IP: Logged
Message:
I would guess the A-Arms. Using the -3" coils will probably make it very difficult to align properly. I am putting a Western Chassis 2"-4" drop on my 99 R/T in just over a week. If you want e-mail me after that and Ill tell you want I think.
Good luck,
Brian
|
Jdpower18
Dodge Dakota
JOIN HERE
1/22/2002
20:42:02
| RE: Best way to drop front end
IP: Logged
Message:
Brian does that require you to take of the R/T suspension??? If so let me know how much you want
|
brianldm
Dodge Dakota
JOIN HERE
1/22/2002
21:43:40
| RE: Best way to drop front end
IP: Logged
Message:
NO it does not require me to remove the stock lowering parts. That is why I chose their setup. They used -1" coils up front to lower the RT. So I will actually get a 3"-5" drop out of that setup.
If you want RT lowering parts check the classified ads, I recall seeing an ad for some.
Good luck,
Brian
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
