| From | Message |
TERRY
Dodge Dakota
JOIN HERE
3/24/2003
13:57:30
|
 Subject: poly a-arm bushings
IP: Logged
Message:
I'll be putting in 2" drop coils so I will change ball joints at same time.
I'm also considering changing control arm bushings
with poly ones has anyone done this .
I changed bushings in my 74 cutlass and it was a pain in the ass.
On the kota is a matter of just getting the rubber out and putting the poly in its place
using existing sleeves.
|
Buzz
Dodge Dakota
JOIN HERE
3/24/2003
15:47:04
|  RE: poly a-arm bushings
IP: Logged
Message:
it is a huge pain in the ass... the uppers are pretty simple but you will need a hydraulic press or an impact gun to get the lowers in.. as well as some spacers to keep from crushing the arm... they are real tight... I did mine at a shop with all the right tools and it took a couple hours after the arms are off... make sure you grease them up really well or they will squeak over every bump... if you want some detailed instructions the way I did mine email me at mxblue23@aol.com and I will write some out for you... they don't come with any and their tech support sucks... feel free to ask any ?
|
TERRY
Dodge Dakota
JOIN HERE
3/24/2003
16:54:15
| RE: poly a-arm bushings
IP: Logged
Message:
FAAAAAAAAAAAACK Ihate pains in my ass.
I'll mail you any help would be welcome
|
suba suba
Dodge Dakota
JOIN HERE
12/20/2018
19:11:04
| upworlMokEkSznSep
IP: Logged
Message:
Ref1qL very handful of internet websites that occur to be in depth below, from our point of view are undoubtedly effectively really worth checking out
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
