Forums
Forum Tools
|
 |
00:30:43 - 12/20/2024
Lowered / Slammed Dakotas
| From | Message |
Ted
Dodge Dakota
JOIN HERE
3/21/2003
21:51:15
|
 Subject: Dropping the rear-hard to do?
IP: Logged
Message:
I will be dropping my truck soon, and wondered how hard the rear is to do. I will be going with the 4" replacement leafs from Belltech. Are they hard to install, what tools will I need, and should I use a lift or is it something I can do in my garage? Also how hard is it to replace the rear shocks? Is there anything I should know about doing that, and how hard is it to do? I ask this cause I want to do as little as possible at the shop.
|
chris
Dodge Dakota
JOIN HERE
3/23/2003
00:04:09
|  RE: Dropping the rear-hard to do?
IP: Logged
Message:
it is easy just put the rear on jack stands, lift your jack high enough so it supports the rear end, cut off the U-bolts(don't waste time undoing them because you should use new ones anyway).When they are off, lift the rear end so that the springs are not under stress and remove. The shocks are easier with the jack let the rear end down until the shock are fully extended, undo the bolts are swap the shocks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
