| From | Message |
titus 4.7 qua
Dodge Dakota
JOIN HERE
1/20/2002
22:28:57
|
 Subject: DROP
IP: Logged
Message:
WHO WOULD YOU RECOMMENED FOR A 1" IN FRONT
2" BACK DROP?
|
smokindak
Dodge Dakota
JOIN HERE
1/21/2002
18:10:58
|  RE: DROP
IP: Logged
Message:
cut a little of the coil, and either some blocks or hangers. if you only want 1" in the front. or get a hold of some 4 cyclinder coil springs. that would lower it a little. that is basically what is on the r/t.
|
kevster
Dodge Dakota
JOIN HERE
1/21/2002
22:12:46
| RE: DROP
IP: Logged
Message:
Do the drop the Correct way, go with Bell Tech springs, and use 2 inch Bell Tech drop blocks, will need 4 degree tapered shims. if this is what you want, cost in parts approx 160.00-180.00 easy install and alignment cost is 50.00.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
