| From | Message |
Josh
Dodge Dakota
JOIN HERE
1/06/2003
17:48:24
|
 Subject: SNIPER KIT AVAILIBLE!
IP: Logged
Message:
It has been quite awhile since I called Cervinis, they have been telling me "2 months" or "2 weeks" for probably about a year now. I got in touch with them today and got some info for everyone. Pricing is $2169.00 for the regular cab with 6 foot bed ONLY. No pricing as of yet for extended cab and it may be awhile till it is released. Also found out that only the passenger side exhaust will be functional. Couldnt really think of any other questions to ask at the time (really didnt think it would be availible). So, if anyone calls and gets more info please post. Also, if anyone gets the kit take pictures and post them.
|
xplikt
GenIII
1/06/2003
18:38:21
| RE: SNIPER KIT AVAILIBLE!
IP: Logged
Message:
2169?! Ouch, I'll have to pass on this one. It's about damn time those bastards got around to finishing it. I would like to see some pitures though.
-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
MikeD
*R/T*
1/06/2003
19:24:52
| RE: SNIPER KIT AVAILIBLE!
IP: Logged
Message:
I really didn't like the grill and the Euro-Headlights from the sketch but the ground effects and front facia was bad@ss...too bad you can7t bey it in pieces.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
Josh
Dodge Dakota
JOIN HERE
1/06/2003
21:04:13
| RE: SNIPER KIT AVAILIBLE!
IP: Logged
Message:
Thats something I meant to ask but forgot, I wonder if they will let you buy it in peices. If anyone happens to find out please leave a post. Thanks
|
milleR/Time
Dodge Dakota
JOIN HERE
1/08/2003
23:56:31
| RE: SNIPER KIT AVAILIBLE!
IP: Logged
Message:
You can buy it piece by piece... front valance seperate and grille. The whole kit is only like maybe $100 cheaper than the individuals.
|
oetkenjc
R/T
1/10/2003
04:31:34
| RE: SNIPER KIT AVAILIBLE!
IP: Logged
Message:
I've been tracking this kit for quite sometime. All along the way I've had the impression that both sides would have an exhaust exit.... but it will not. Apparently our gas tank is in the way on the driver side. I found a way to get a bend in to where you could have the pipe go by it without heating the gas tank with shieldings. The exhaust kit that comes with the kit will be 3"'s after the cat. Although that should be fine... I just... dont like the idea on just one pipe, to one side.... was going for the true dual route and look.
I may just buy the majority of the kit and go with a different roll pan and sideskirts. Anyone know a good place to purchase sideskirts that allow you too keep your fender flares? If so... I'd really like to know.
jonathan
Best Run: .520rt, 2.138 60foot, 15.041secs @ 89.44mph
PCM, 160 degree Tstat, Nitto 450's, Darkfury's homemade SS Grill (www.chimptopia.com/pimptopia/grille.html)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
