| From | Message |
03graphrt
Dodge Dakota
JOIN HERE
12/02/2002
22:04:43
|
 Subject: nicest looking roll pan
IP: Logged
Message:
hey im looking for a roll pan for a 03 dak,ive seen some nice ones from street scene and xenon, which rollpans does everyone think looks the best and if i could see some pics tha would be helpful, also how much are they painted???and could i do the install myself???im not really good with tools but its its easy nuts and bolts i can do it.thanks and later.
|
Marks DQC
GenIII
12/02/2002
22:26:00
|  RE: nicest looking roll pan
IP: Logged
Message:
The Precision Steel roll pan is straight across and easy to install. I had it painted professionally. $149 for the roll pan and it required some prep before painting.
2001 Dakota Quad Cab SLT , 4.7L, Auto, 3.55, Garnet Red over Slate
Zaino, Tint, Vent Guard, Gaylords Lid, Hotchkis, Bilstein, Wet Okole Covers, Painted Grill Shell w/ Ram inserts, S/S Bumper/Valence Cover, Billet Antenna, Precision Roll Pan, APC Clear Corners, Airaid, Gibson
|
kota on 20s
GenIII
12/03/2002
00:20:07
| RE: nicest looking roll pan
IP: Logged
Message:
i have the same one, but its welded in place.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ceramic JBA headers, 3
|
D
GenIII
12/03/2002
01:57:50
| RE: nicest looking roll pan
IP: Logged
Message:
ditto...I just dont know how to post a pic (check
my webpage in the profile)
2001 4.7 CC
shaved
dropped
slow...for now : )
|
Lew360
Dodge Dakota
JOIN HERE
12/03/2002
02:30:28
| RE: nicest looking roll pan
IP: Logged
Message:
I got the Street Scene fiberglass, it was about $100 2 years ago. I got it put on when I was rearended so I don't know how much to paint. [img]http://dodgetrucks.org/photopost/data/358truckrear-med.JPG[/img]
'99 RC Dakota R/T, Gibson Headers and Cat-back, MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger, M-1 4/2, Mopar PCM.
|
Lew360
Dodge Dakota
JOIN HERE
12/03/2002
02:32:47
| RE: nicest looking roll pan
IP: Logged
Message:
I guess you have to be a member to post pictures. You can cut and paste http://dodgetrucks.org/photopost/data/358truckrear-med.JPG
'99 RC Dakota R/T, Gibson Headers and Cat-back, MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger, M-1 4/2, Mopar PCM
|
cryppie
Dodge Dakota
JOIN HERE
12/03/2002
02:37:18
| RE: nicest looking roll pan
IP: Logged
Message:
Lew360,
type: ?img src="http://dodgetrucks.org/photopost/data/358truckrear-med.JPG">
but replace the ? with a <
|
Lew360
Dodge Dakota
JOIN HERE
12/03/2002
04:42:16
| RE: nicest looking roll pan
IP: Logged
Message:
Thanks Cryppie
|
03graphrt
Dodge Dakota
JOIN HERE
12/03/2002
17:30:55
| RE: nicest looking roll pan
IP: Logged
Message:
sweet those are all nice but im looking more fore a fiberglass one just cuz the price and i dont want to weld it in.im gona go for either the gen 1 or 2 not sure tho.thanks all.
|
macman37
Dodge Dakota
JOIN HERE
12/03/2002
17:58:58
| RE: nicest looking roll pan
IP: Logged
Message:
I have a dumb question: Why is it called a Roll Pan?
thanks. Be gentle - I have no idea.
jim
|
03graphrt
Dodge Dakota
JOIN HERE
12/03/2002
18:30:50
| RE: nicest looking roll pan
IP: Logged
Message:
o yea another ?, what lid is that on your truck kota on 20s???thanks.
|
kota on 20s
GenIII
12/03/2002
18:37:39
| RE: nicest looking roll pan
IP: Logged
Message:
its a stockland. the innovations lid looks exactly the same
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ceramic JBA headers, 3
|
D
GenIII
12/03/2002
20:01:33
| RE: nicest looking roll pan
IP: Logged
Message:
fiberglass will flex and is prone to cracking
once its been painted...a steel pan is your
best bet, the sir michaels fits like a glove, and
is super stout.
Eric:::: fix your mods in your profile, they cut off
at "3"
2001 4.7 CC
shaved
dropped
slow...for now : )
|
justa4x2
Dodge Dakota
JOIN HERE
12/03/2002
20:16:38
| RE: nicest looking roll pan
IP: Logged
Message:
im in the process of making one. not sure if its going to be alum or steel.
|
kota on 20s
GenIII
12/03/2002
20:25:26
| RE: nicest looking roll pan
IP: Logged
Message:
dude, its only $100 its a LOT easier to just buy one
~Eric
superdupercharged, M-1, 1.7 RR's, 52mm TB, ceramic headers, 3" carsound cat, and gibson muffler
|
Daker777
Dodge Dakota
JOIN HERE
12/03/2002
23:03:41
| RE: nicest looking roll pan
IP: Logged
Message:
They all look sweet. Especially the white one. But the small mirrors are just not my thing. Its all about the dumbo ears sticking out on the sides. Oh and Eric, to bad you dont have 17's cus i have some tires that would be PEEEERfict on that thing : )
|
92whitedak
Dodge Dakota
JOIN HERE
12/04/2002
01:14:25
| RE: nicest looking roll pan
IP: Logged
Message:
macman: i'm just guessing here but i think they refer to it as a "roll pan" becuase, quite simply, if you look at it, it sort of rolls from the tailgate down, rather than "jutting" like the stock bumpers. hope that helped.
-fox deacon
|
Daker777
Dodge Dakota
JOIN HERE
12/04/2002
02:18:00
| RE: nicest looking roll pan
IP: Logged
Message:
As i heard through the grapevine, it is really called a rolled rear end, or rolling rear end. And is called that just for that reason, it is rolled under the back. Kinda a knewer way of saying it I guess?
|
kota on 20s
GenIII
12/04/2002
02:20:44
| RE: nicest looking roll pan
IP: Logged
Message:
sorry dude, but i dont want your mudders...lol
~Eric
superdupercharged, M-1, 1.7 RR's, 52mm TB, ceramic headers, 3" carsound cat, and gibson muffler
|
chris
Dodge Dakota
JOIN HERE
12/04/2002
12:02:18
| RE: nicest looking roll pan
IP: Logged
Message:
i would like to put my vote in for the sir michaels steel pan best fit and finish i have seen. i would also like to point out that truck beds are designed to flex and most roll pans welded in tend to crack at the corners unless you weld the gate shut as well, or add a brace across the top of the bed. i have a stupid low bagged full size chevy and it developes crackes about every second year on the corners of the roll pan. i bought my first dodge this year its a 2003 QC 4x4 4.7 and i said this is going to stay stock well it now has clear corners no stickers street sceen speed grill and power heated mirrors. i just ordered a sir michaels roll pan and my lid is waiting for the pan so they can get paint at the same time. great site thanks to all
|
MNKYBRS
GenIII
12/04/2002
13:54:52
| RE: nicest looking roll pan
IP: Logged
Message:
Kota....
Is yours a 98 that you bought new inJan. of 98?
98 Dakota Sport C/C V6
Deep Amethist
Clear corners
Home Brew Intake Custom Made Grille
3923's DynoMax 17748
ASA TRS Wheels on 235/55R16 Kumho Tires
|
kota on 20s
GenIII
12/04/2002
14:06:42
| RE: nicest looking roll pan
IP: Logged
Message:
i bought it new in april of 98
~Eric
superdupercharged, M-1, 1.7 RR's, 52mm TB, ceramic headers, 3" carsound cat, and gibson muffler
|
MNKYBRS
GenIII
12/04/2002
18:52:01
| RE: nicest looking roll pan
IP: Logged
Message:
Kota...
Just curious...I bought mine new in January 98 here in San Jose, California, and my license plate also started with 5T94.
98 Dakota Sport C/C V6
Deep Amethist
Clear corners
Home Brew Intake Custom Made Grille
3923's DynoMax 17748
ASA TRS Wheels on 235/55R16 Kumho Tires
|
Ted
Dodge Dakota
JOIN HERE
12/04/2002
19:59:41
| RE: nicest looking roll pan
IP: Logged
Message:
I have a Xenon roll pan, I think it looks the best out of all of them out there. I paid like $130 for it back in September and got it painted for free at work (body shop). After talking to my boss about buying one, he said it makes really no difference which material you buy. In the case of a rear end accident your chances of getting hit perfectly straight are extremely rare therefore it makes no difference if its steel, poly, or fiberglass you will end up with damage. My advice is buy the one that looks the best.
|
| | P 1 Next Page>> |
