| From | Message |
Clevite 77
GenIII
11/24/2002
03:30:32
|
 Subject: Cup holder question
IP: Logged
Message:
I have a 2002 CC Auto with a bench seat. It has the 2 adjustable cup holders under the dash, is there any aftermarket holder that will replace this thing that's half way decent? I had a 99 s-10 5spd, and it had the dual cup holders, that had rubber "flaps" I guess you could call them, they were perfect, they would hold a HUGE McDonald cup or a small can. They were deep enough, and had a good grip on them. The one in my Dakota just flat out sucks, and they need to go. They only grab the bottom of the cup, so a full pop or whatever tips over when I take off or turn. and I'm so tired of the sh!t spilling. Sorry to vent but it pisses me off. I wonder if they even tested these things out.
Any ideas would greatly be appreciated
Line-X Over The Rail Bed Liner
Grille-Tech Grill Insert (Silver)
Euro Clear Corners
Krypton 4300K Blue/Whites
Home Brew Intake
Dual Exhaust
3923 Autolite Plugs
TPS Set At .705
Removed Rubber Flap
I've used Mobil -1 Full Synthetic Oil And Filter Since I Had 6,000 miles
|
Clevite 77
GenIII
11/24/2002
03:35:35
| RE: Cup holder question
IP: Logged
Message:
in fact these are the ones I have, different color of course, but the same kind
Line-X Over The Rail Bed Liner
Grille-Tech Grill Insert (Silver)
Euro Clear Corners
Krypton 4300K Blue/Whites
Home Brew Intake
Dual Exhaust
3923 Autolite Plugs
TPS Set At .705
Removed Rubber Flap
I've used Mobil -1 Full Synthetic Oil And Filter Since I Had 6,000 miles
|
Josh
Dodge Dakota
JOIN HERE
11/24/2002
08:03:10
| RE: Cup holder question
IP: Logged
Message:
HAHA... I thought I was the only one that noticed that. I am in the Dakota alot and almost have a drink with me.. Well, those cupholders are SH*T. I spill at least 2-3 drinks a month.. My solution: Custom Center console (and I am going to put cupholders on it ;) http://www.intense99dak.com/console.htm
|
Michael
DakotaEnthusiast
11/24/2002
10:30:37
| RE: Cup holder question
IP: Logged
Message:
They should have kept them the way mine are in my 2000 Quad, they slide out from the seat when you need them and are up high, not on the floor.
Z-Tube, R/T Rims, SSB Rear Disc Conversion, Alpine Head-Unit, Infinity Kappa Speakers, SilverStar Headlights, HO Cams & Intake installed.
Got H.O. ?
|
Greg555
Dodge Dakota
JOIN HERE
11/25/2002
12:35:41
| RE: Cup holder question
IP: Logged
Message:
yeah hte ones in the 00's are great. i love mine
cause you can kinda push it closed a lil to make
sure its holding your drink nice and snug. i'd say
try to find one and mount it.
Greg
|
huh
Dodge Dakota
JOIN HERE
11/25/2002
16:46:39
| RE: Cup holder question
IP: Logged
Message:
Greg555 has a good point. alot of time they go cheaper but leave the old mounts in place. I got a 99 and really like it.
check if you can mount a slide out holder and
use the original one to hold your cell phone
|
MightyDakSXT
GenIII
11/25/2002
17:31:47
| RE: Cup holder question
IP: Logged
Message:
If you think those are bad, you should see the ones in a 2002 5-speed. ARGH!
2002 RC SXT, 3.9L V6, 5-spd, 3.55 rear, Extang Tonneau, Autolite 3923 Plugs, Borg Warner Cap & Rotor, Quick D Intake, Ported V8 TB, Gibson Exhaust, Robert Shaw 180° T-stat, JBA 9mm Wires
Check out Dakota USA!
|
Gentleman
Dodge Dakota
JOIN HERE
11/25/2002
19:46:32
| RE: Cup holder question
IP: Logged
Message:
I could never find them in the dark
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
