| From | Message |
cory
Dodge Dakota
JOIN HERE
11/17/2002
00:10:37
|
 Subject: overhead console
IP: Logged
Message:
Does any one know if it is feasable to install an overhead console in a 94 dak? Mostly wondering if the compass controls and thermometer are internal or if its all a part of the pcm. thanks for the help
|
DaveR
GenII
 
11/17/2002
01:25:07
| RE: overhead console
IP: Logged
Message:
I have wondered similar things. I am pretty sure that the temp sensor is external on the newr trucks. WHat I wonder is what to mount the console to. Are there holes for it that fit the Mark III conversion or would it have to be fastened some other way?
|
cory
Dodge Dakota
JOIN HERE
11/17/2002
01:38:05
| RE: overhead console
IP: Logged
Message:
Daver that ram air set up you have has just caught my eye. How well is that working for you. It looks like a backyard kind of thing. Could you let me in on how its set up? thanks man
|
mettoo
Dodge Dakota
JOIN HERE
11/17/2002
16:04:19
| RE: overhead console
IP: Logged
Message:
I was wondering about adding an overhead console in my 2001. Seems like a pain though.
|
DaveR
GenII
11/17/2002
17:00:44
| RE: overhead console
IP: Logged
Message:
It is a ramair kit from www.ramairbox.com
I like the kit a lot as it has quieted the engine bay a lot as well as bringing up the horsepower a bit. It is one of those mods that has to be messured at the track since a chassis dyno won't have the same effect. If you want to contact me directly though email as to keep the post from straying, feel free.
|
Augie
Dodge Dakota
JOIN HERE
3/30/2003
02:55:52
| RE: overhead console
IP: Logged
Message:
I recently purchased a 2003 quad cab. It’s fully loaded but didn’t come with the elusive overhead computer. After reading most of the postings. I was able to obtain an overhead computer on Ebay. I’m interested in hardwiring the overhead computer. The only option in the computer that I am interested in is the compass and outside temperature sensor. The computer I have has four wires attached to it. I know that one wire is the constant power, the second is ground and the third is the ignition power. I’m not sure what the forth is I’m assuming it the Outside temp reading. I got the compass to work but cant figure out how to get the outside temp to work. My truck came with a senor for outside temp. The senor has two wire going into it. How can I hardwire my over head computer so that my outside temp works. Also does anybody know what PCI bus stands for, and were can I find it in my truck. Any information would be greatly appreciated.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
