| From | Message |
Simpleman96
Dodge Dakota
JOIN HERE
11/13/2002
09:30:08
|
 Subject: Cam position sensor
IP: Logged
Message:
Any one know if a cam position sensor can be bad, but the engine still run? My truck still stumbles at initial startup and almost everything except the block is new the auto parts guy said if this sensor was bad the truck would not run.
Its a 96 V6 auto 100K miles.
|
ticats
Dodge Dakota
JOIN HERE
11/13/2002
14:40:53
| RE: Cam position sensor
IP: Logged
Message:
It can be out of synch or faulty and the engine will run but with some driveability problems. The sensor determines when each injector opens.
ticats
|
kennungesser
*GenI*
11/13/2002
18:08:11
| RE: Cam position sensor
IP: Logged
Message:
When mine went bad , the truck would crank but not start. After letting it set for about 5 min. it would start and run just fine. It did it to me three times before the dealer fixed it. Never had any problems driving it , just starting it.
Kenneth L Nungesser
"We are determined to defend our lands and, if it be the "Great Spirit's" will, we wish to leave our bones upon them."
Tecumseh, Shawnee Chief 1813
|
Simpleman96
Dodge Dakota
JOIN HERE
11/14/2002
07:23:02
| RE: Cam position sensor
IP: Logged
Message:
I checked the dist indexing and its good. i do have some loss of power though. The eng is moderately modified. Ive checked the dist bushing to.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
