| From | Message |
Rudy
Dodge Dakota
JOIN HERE
10/28/2002
21:41:02
|
 Subject: Fog Lights factory switch
IP: Logged
Message:
Hey bought a set of Hella 550 for my 00 Club Cab I had one of the Techs at work install them. I didnt wnat another hole in the dash so he piggy backed them on the OE Fog light circuit.
They now turn on and of with the factory switch and OE fog lights
Just want to let those who want to do this know it can be done
|
2THEXTRM
GenIII
10/28/2002
22:32:38
| RE: Fog Lights factory switch
IP: Logged
Message:
I would like to know how this was done. Got the wire colors I should tap into with any other tips? Wanted to wire my wifes driving lamps like this so she doesn't have to play with more switches than she needs to:) Thanks!
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Custom Manik Nerfs, Hard Work and $$$$$$$$$$
|
Jim
Dodge Dakota
JOIN HERE
6/28/2003
21:09:27
| RE: Fog Lights factory switch
IP: Logged
Message:
hey, I just ordered the Hella 550 driving light kit and want to use the fog switch instead of the rocker switch (less holes in the dash the better).I have a '02 regular cab with a westin safari bar I will mount the lights to. Some basic instructions would be helpful in this install. Any wire colors?
|
rudy
Dodge Dakota
JOIN HERE
6/29/2003
11:49:07
| RE: Fog Lights factory switch
IP: Logged
Message:
Well I did this for only two weeeks I kept blowing the switch so I had to have the rocker switch intstalled. If you do install your lights and use the oe switch remember that the factory lights work on ground the lights always are hot the switch just completes the ground.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
