Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
01:14:19 - 12/20/2024

General Dakota Board
FromMessage
Nick
*GenIII*
 Email User Profile

4/14/2001
23:54:57

Subject: Oops.
IP: Logged

Message:
Well after the Moab trip. The exhaust sounded different. Now I wont claim to be a genuis on exhaust systems. But I'm guessing it may have something to do with hitting it with a rock and the large hole in the muffler's intake. That appeared to be ripped from the intake tube.

So oops.

My guess is it cannot be repaired. And will require a new muffler. It has duals coming out the back of the muffler (I bought it used and don't know which system it is). So when I take it in to Midas or Minekee on Monday what should I look out for?

1997 Dodge Dakota Sport 5.2-V-8
Duel Exhaust, Growler Mufflers

RonW
*GenIII*
 User Profile

4/15/2001
00:57:37

RE: Oops.
IP: Logged

Message:
First of all, I wouldn't take it to one of those national chains that hire you as long as your body's warm and you can hold a wrench in one of your hands. Sorry I sound so harsh, but I've had friends that have had some pretty bad luck with those kinds of places. I always look for a place that's been in business for 20 years or longer where the business has been in the family, etc. They don't charge any more than the chains and they do excellent work in most cases.
I don't know what to tell you to look out for. I would probably shop around and see what the best bang is for the buck if you're looking for cheap. There's a lot of dual exhaust systems out there. I wouldn't go much bigger than 2.5 to 2.75 inches in diameter.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD

95DakotaV8
*GenII*
 User Profile

4/15/2001
06:37:04

RE: Oops.
IP: Logged

Message:
Nick, Ron has a point BUT I had my exhaust done at a Meineke. I watched them install a full system on a Camaro and they were very thorough. I had them weld in my Flowmaster, they cleaned the joints, fabricated a J-hook mount, welded it in, checked for leaks and then painted everything they had just cleaned so the bare surfaces did not rust.

Meineke's in my area stock a large quantity of Flowmasters so chances are they have a single in, dual out that is a direct replacement for yours. Do some shopping around and watch the technicians for a while (if it has stopped snowing in Denver!)

Kevin Rants
95 CC SLT 4x4, 5.2L, 5spd
Family Man!

Wayne
GenIII
 Email User Profile

4/15/2001
07:49:14

RE: Oops.
IP: Logged

Message:
Kevin and Ron are both right. I have a favorite shop in my area that I can trust. Chain stores are as good as their techs. I wouldn't go any smaller than 2.5.

Wayne Van Metre
'99 CC SLT 5.2/auto/3.90 anti spin

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.