| From | Message |
EBOLAVIRS
Dodge Dakota
JOIN HERE
10/02/2002
10:47:31
|
 Subject: New Diff cover and nerfs installed *pics
IP: Logged
Message:
Well I finally got around to installing my new mag-hytec diff cover and taking pictures of the smittybuilt stainless nerf bars which have been on for awhile now. The mag-hytec is top quality stuff, no leaks, holds almost 6 quarts of gear oil, has a magnetic drain plug and dip stick to check oil levels. Here are the pics:
Here is the new maghytec before install:
Here is the inside of the stock diff once remmoved:
Outside of the stock diff:
All the dead royalpurple and mopar soldiers:
The new diff cover installed:
The smittybuilts installed:
|
REKER
*GenIII*
 
10/02/2002
11:07:23
|  RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
Nice Nerf bars... how much were they and where did u get them from??.... As for the Dif Cover, very nice job. I like those magnetic drain plugs!
ROB aka REKER
Mods: Home Brew Grille(soon to be silver with clear coat), Autolite 3923 plugs, Custom Air Intake (blue fading into silver).
Next Mod: Ordered 9/26 Gunmetal Altezza Taillights should be here soon!!
"live life to the fullest and have fun doing it!"
|
Bill
GenIII
10/02/2002
11:22:05
| RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
Everything looks awesome! I like those nerf bars. I have been looking for some for my club cab, haven't found what i am looking for yet though.
Bill
Bill's Truck Page
ARE Tonneau Cover
Wet Okole Seat Covers
Homebrew Intake and Other Mods Coming Soon!!
|
Art
Dodge Dakota
JOIN HERE
10/02/2002
11:40:35
| RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
Nice diff cover man it holds 6 quarts? WOW! I just changed my rear diff oil and it took only 2 and a 1/2 litres,Just how thick is that cover compared to stock? I was thinking of getting that next time but I have the rear torsion bar and that mag-hytech cover might be to fat to fit.
|
EBOLAVIRS
Dodge Dakota
JOIN HERE
10/02/2002
15:54:54
| RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
I too was worried about the torsion bar clearance. I called mag-hytec and spoke to them in person about it. Very nice folks they said i wouldnt have a problem and I dont. It works just fine with about 1" of clearance still. As for the nerf bars I ordered them from 4wheelparts. They are stainless steel so I dont have to worry about rusting or anything. They cost a little bit more but were worth it I think. They mounting was very easy requiring only a few bolts and no drilling.
|
IntenseDak39
*GenIII*
10/02/2002
16:17:32
| RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
nice ass!
--"did you mean the charger, because that's got a hemi, too!"
98 Dakota Sport V6: 8.95@77.9 mph (1/8th)
99 Oldsmobile Alero GL3 V6: xx@xx mph
|
Bruce P
Dodge Dakota
JOIN HERE
10/02/2002
20:55:28
| RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
Have you got a website to maghytec?
I like the idea of having a DRAIN plug!
How much does this cover cost?
|
BlackDak02
*GenIII*
10/02/2002
21:01:58
|  RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
Good work! Looks great! 
2002 Black CC SLT 4x4
4.7L 45RFE 3.55 LSRD
"Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has."
Descartes
|
dabart65
Dodge Dakota
JOIN HERE
10/02/2002
21:34:14
| RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
I found it here:
http://www.mag-hytec.com/
|
EBOLAVIRS
Dodge Dakota
JOIN HERE
10/03/2002
08:19:35
| RE: New Diff cover and nerfs installed *pics
IP: Logged
Message:
My bad on the place where I purchased the nerf bars. I was looking through my receipts today and found that I purchased them at www.4west.com. Out the door they ran 389.22. That was by far the best price I could find for stainless steel. You could find chrome cheaper I think but I have always had problems with the damn chrome chipping off. Anyway as far as mag-hytec goes I would not hesitate to recommend their products. Definately top notch stuff.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
