| From | Message |
REKER
*GenIII*
 
9/25/2002
15:06:23
|
 Subject: Re-Taping Window Deflectors??
IP: Logged
Message:
Anyone ever Re-Tape their window deflectors??... Mine are starting to un-stick and there for forming a leak. I was going to use window glazing tape, but heard that wont work. Which kind of tape should i use??.. i havent been to Home Depot yet to look around, so your help would be highly appreciated.
thanks
ROB aka REKER
"Gas, Grass or Ass....... NOBODY Rides for Free!!"
2000 Intense Blue Club Cab
4.7L V8 Auto 4X4
3.55 Gears
Mods: Homebrew Grille, AutoLite 3923s and Cd Player.. TONS more to come!!!!
|
John Cassell
Dodge Dakota
JOIN HERE
9/25/2002
15:45:11
|  RE: Re-Taping Window Deflectors??
IP: Logged
Message:
Many Auto Parts stores carry double sided trim tape. If you can't find it there try a body shop. Good luck.
|
Will
Dodge Dakota
JOIN HERE
9/25/2002
16:32:44
|  RE: Re-Taping Window Deflectors??
IP: Logged
Message:
Look for 3M tape at the auto parts store I believe it's got a red film on the one side
|
RACERDY
GenIII
9/25/2002
16:33:09
| RE: Re-Taping Window Deflectors??
IP: Logged
Message:
double sided tape is the way to go. Probably can find it about any where. Good luck
JOHN
|
handi2
GenIII
9/25/2002
21:17:56
| RE: Re-Taping Window Deflectors??
IP: Logged
Message:
The 3-M adhesive tape. For body side moldings and anything else. It's the same tape that came on the deflectors.
http://photos.yahoo.com/handi254310
|
BobbyD
Dodge Dakota
JOIN HERE
9/26/2002
00:18:05
| RE: Re-Taping Window Deflectors??
IP: Logged
Message:
Use the 3m tape. That's what my bug shield came with and it's holding strong.
Anyone have in-channel window visors? I got mine and less than a week later, the passanger one kept falling down last Saturday. It goes all the way to the bottom of the window in front and it's suppose to rest on the "outer seal."
I think it was either bumped it or the heat (from sitting in the sun) temporarily shrunk it. Either way, I'm waiting for it to go flying off when I'm at hiway speeds and decide to put the window down.
Thoughts/suggestions/experiences? Thinking about using double sided tape to keep them up, but not sure it will fit back in the groove with the window all the way up.
|
Halo3
GenIII
9/26/2002
08:35:26
| RE: Re-Taping Window Deflectors??
IP: Logged
Message:
I've had the WeatherTech Weatherflectors in mine for over a year now. I love them!
BobbyD: Mine are a tight fit in the window track. I'd check it out to make sure that it is seating straight & true. If not, I'd think that, with them only being a week old, WeatherTech or whoever you purchased from would exchange it for you. It could be a bum deflector, as that doesn't sound like anyone else's experience.
Semper Fi,
Halo3
'00 Lt. Driftwood 4x4 SLT DQC w/5.9L
Halo3's Dak
|
MightyDakSXT
GenIII
9/26/2002
10:11:40
| RE: Re-Taping Window Deflectors??
IP: Logged
Message:
I just put the Weathertech Weatherflectors on a couple of days ago and I can't say that I'm extremely happy with them. With the windows shut, I can hear more wind noise with them. Also, opening and closing my window causes a squeaking noise. I believe it the window making contact with the inner lip. I don't believe I have them installed incorrectly.
2002 RC SXT, 3.9 Liter V6, 5-spd, 3.55 rear, Extang Tonneau, Autolite 3923 Plugs, Borg Warner Cap & Rotor, Quick D Intake, Modified V8 TB, Gibson Exhaust, Robert Shaw 180° T-stat, Custom Grille, Custom JBA 9mm Power Cables
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
