| From | Message |
sandman
Dodge Dakota
JOIN HERE
9/14/2002
21:38:05
|
 Subject: Wheels and Bumper
IP: Logged
Message:
Has anyone put 2003 Dodge Ram 20" wheels on their Dak yet?? I have a 2001 QC 4x4 and realy like the factory crome Ram wheels. My second question is about a front winch bumper I would like to try to talk the wife into a nice front Christmas winch bumper to go with my nice tax season winch! Does anyone know of a source for a nice chrome front winch bumper for a 2001 Dak QC?
|
BlackDak02
*GenIII*
9/14/2002
22:09:22
|  RE: Wheels and Bumper
IP: Logged
Message:
sandman this is the sweetest winch bumper for a Dakota that I've seen. forexfore and RESQready have it on the front of their trucks and run 33's with no lift kit needed.
2002 Black CC SLT 4x4
4.7L 45RFE 3.55 LSRD
|
Michael
DakotaEnthusiast
9/14/2002
23:13:37
| RE: Wheels and Bumper
IP: Logged
Message:
Sorry man,
the Ram uses a five lug pattern and the dak uses a six. Although I did see a similar aftermarket rim that looks close to the ram wheel. If your interested I'll see if I can find it again and let you know the manufacturer and model.
Z-Tube, R/T Rims, SSB Rear Disc Conversion, Alpine Head-Unit, Infinity Kappa Speakers, SilverStar Headlights, HO Cams & Intake installed.
Got H.O. ?
|
sandman
Dodge Dakota
JOIN HERE
9/15/2002
11:09:59
| RE: Wheels and Bumper
IP: Logged
Message:
Michael I was looking at some at the YMCA and counted six lug nuts and the spaceing looked the same. I am not worried about that. I am a little concerned about wheel offset and speedo calibration. I am not worried about speed reading for cluster but I have heard a few guys on this board have a problems with wheel speed varation due to under inflated tires and here I am wanting to change it by 4 inch's. Dodge ECM's, PCM's and BRK Modules seems to be awful picky about the signal they recieve! I realy do not want to buy the wheels and then get hit with every concievable speed related code that is in the system!
|
forexfour
GenIII
9/16/2002
16:14:07
| RE: Wheels and Bumper
IP: Logged
Message:
RESQready is only running 32's since he has a BS of 3.5" or so. He can't run the 33's unless he goes back to stock BS of 5.5". Sorry DJ! But his truck does look great at Hector Heights in Hollister as you posted Blackdak02!
If your concerned about speed recalibrating and the speed signal to you ABS and PCM you can get the superlift calibrator. I put it in mine and it helps out allot.
As far as going Chrome with a Hanson, WOW gonna cost you but you can do it. That was my first choice until I found out how long it takes and how much! I thought the custom color I got was a little pricey.
FXF
Never late for a Tee time or wheelin with my buddies! Always ready for both!!!Forexfour's home page.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
