| From | Message |
MichiganDak
GenI
 
8/17/2002
18:22:13
|
 Subject: IAT Location Check (round 2)
IP: Logged
Message:
Okay, I think I found it once again (I was wrong last time). Someone expained roughly where it is, but consider me a complete idiot when it comes to indentifying things on an engine (I've come a long way though!).
In the first picture, I think it's the gray 'plug' looking thing sticking in the bottom engine 'block'.
The second picture is a general shot, if anyone can describe where it is. Even better, download it yourself and use an editor to mark and point it out.
Be patient if you don't have Cable/DSL, they're about 800k a pop.
http://www.theavatars.com/sensor.jpg
http://www.theavatars.com/sensor2.jpg
You guys never let me down, thanks in advance!
-Dan
I cap my Dak.
|
yates-in-DE
GenIII
8/17/2002
18:45:32
| RE: IAT Location Check (round 2)
IP: Logged
Message:
Dan,
Try again, the IAT is going to be in the intake manifold, on the drivers side of the Throttle body. The intake manifold is what the engine sucks air through. I think what you took a picture of was the heat sensor. If you look straight at the engine it will be on the right side of the throttle body on the drivers side. I think on your engine the air hat may cover it up, so you may have to take it off to see it.
Good Luck,
Lynn
My VW Killer
Lynn
|
DakotaDan
*GenIII*
8/17/2002
18:49:30
|  RE: IAT Location Check (round 2)
IP: Logged
Message:
Dan
No
&
No
You've got mail !!!!
Dan
K&N FIPK # 57-1517 * DynoMax #17748
OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K
Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
michigandak
GenI
8/17/2002
18:58:28
| RE: IAT Location Check (round 2)
IP: Logged
Message:
Right side? Wow - definately way off! I'll go out now and give a looksie.
Thanks!
-D
I cap my Dak.
|
michigandak
GenI
8/17/2002
19:15:40
| RE: IAT Location Check (round 2)
IP: Logged
Message:
Found it! Dakota Dan emailed me a pic that was much more similiar to my own engine setup. Bingo.
Thanks! Looks like I've got a Sunday project ahead.
-Dan
I cap my Dak.
|
CW
GenIII
8/17/2002
23:06:31
|  RE: IAT Location Check (round 2)
IP: Logged
Message:
Yes 4.7s are way different.
2001 4.7HO RC 5sp 3.92 LSD
Click on thumbnail for mods
|
Ronnie
Dodge Dakota
JOIN HERE
9/29/2003
11:13:02
| RE: IAT Location Check (round 2)
IP: Logged
Message:
ok, i have a 3.9, can you tell me where mine is?
|
Tazzy
GenIII
9/29/2003
12:13:31
| RE: IAT Location Check (round 2)
IP: Logged
Message:
#2 intake runner on 3.9's..brass thing with a connector..2 wires/.
Left side of engine as you stand in front of the truck..
Brass Cap& Rotor
K&N Drop in
Relocated IAT
MSD6a
Bullet Muffler
TPS mod
|
ronnie
Dodge Dakota
JOIN HERE
9/30/2003
16:46:42
| RE: IAT Location Check (round 2)
IP: Logged
Message:
ok, cool. If i want to move it, were should i move it to?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
