| From | Message |
Nitro Junkie
R/T
8/05/2002
10:48:48
|
 Subject: Remote Start installed ....
IP: Logged
Message:
I just had a remote start system installed on my R/T. Very nice !!!! Sounds sweet when it starts up as I am walking up to it.
2000 R/T
Belltech 2"-3" Drop w/ Nitro Drop Shocks
40 Series Flowmaster Dumped Exhaust
8mm Taylor Spiro Pro wires w/ Autolite 3923's
Mopar Performance Distributor
180 T-Stat
Turbo City Dual Tube Air Intake w/ Twin 5" Round K&N Filters
Speed Scene Grill
|
Clevite 77
Dodge Dakota
JOIN HERE
8/05/2002
11:34:06
|  RE: Remote Start installed ....
IP: Logged
Message:
did you have the factory remote keyless entery?
Right now my truck has the factory remote keyless entery, no alarm, but I would like to get a remote start with alarm. Do you know if it's possible with a factory keyless entry setup?
|
Knobbyman
*GenIII*
8/05/2002
12:17:32
| RE: Remote Start installed ....
IP: Logged
Message:
Clevite - I've been looking for a remote start that uses the factory remote. I've heard someone on this board say they've done it but that's all the details I know of..
If anyone knows of a Remote Start while keeping the factory remote.. I'd really like to know how it was done.
'01 Graphite QC 4x4
4.7 3.55 LSD
4.5" Customized Suspension Lift
305x70x16 GoodYear MT/R's
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
Nitro Junkie
R/T
8/05/2002
12:21:02
|  RE: Remote Start installed ....
IP: Logged
Message:
yea i had the keyless entry factory remote. the remote start system has a remote that takes the place of factory. It has 4 buttons unlock, lock, start, & panic. I dont need to use the factory one anymore the new one does it all.
2000 R/T
Belltech 2"-3" Drop w/ Nitro Drop Shocks
40 Series Flowmaster Dumped Exhaust
8mm Taylor Spiro Pro wires w/ Autolite 3923's
Mopar Performance Distributor
180 T-Stat
Turbo City Dual Tube Air Intake w/ Twin 5" Round K&N Filters
Speed Scene Grill
|
ZenDak
Dodge Dakota
JOIN HERE
8/05/2002
12:42:53
| RE: Remote Start installed ....
IP: Logged
Message:
Dare we ask how much, and where you got it????
|
dak-quack
GenIII
8/05/2002
12:55:24
| RE: Remote Start installed ....
IP: Logged
Message:
Is the new key transmitter smaller than the factory transmitter?
2002 QC, 4.7 3.92 4x4 AT LSD
Formerly dakquad
NO MODS.....NONE!!!
|
Clevite 77
Dodge Dakota
JOIN HERE
8/05/2002
14:54:35
| RE: Remote Start installed ....
IP: Logged
Message:
I like my oe piece, it doesn't look so genaric. but I'd also like to have an alarm too
|
Nitro Junkie
R/T
8/05/2002
16:07:37
| RE: Remote Start installed ....
IP: Logged
Message:
the new remote is exactly like the chevrolet remotes.(it's a little shorter but a little wider) i will scan it tonight along with some pics of my truck that I have been meaning to do.
2000 R/T
Belltech 2"-3" Drop w/ Nitro Drop Shocks
40 Series Flowmaster Dumped Exhaust
8mm Taylor Spiro Pro wires w/ Autolite 3923's
Mopar Performance Distributor
180 T-Stat
Turbo City Dual Tube Air Intake w/ Twin 5" Round K&N Filters
Speed Scene Grill
|
MightyDakSXT
GenIII
8/05/2002
16:16:03
| RE: Remote Start installed ....
IP: Logged
Message:
Can you put a remote start in a manual transmission vehicle? I wouldn't mind putting on in my truck. Wisconsin winters suck!
2002 RC SXT, 3.9 Liter V6, 5-speed, 3.55 rear, Extang Tonneau, Autolite 3923 Plugs, Borg Warner Cap & Rotor, Quick D Intake, Modified V8 TB, Gibson Catback Exhaust, Robert Shaw 180° T-stat, Custom Grille
|
larry
R/T
8/05/2002
16:20:53
| RE: Remote Start installed ....
IP: Logged
Message:
yes they make them for manual trans.
|
LSett
Dodge Dakota
JOIN HERE
8/05/2002
17:35:48
| RE: Remote Start installed ....
IP: Logged
Message:
I actually heard of a system that works with your stock keyless entry. You set it up so that you hit lock, unlock, lock and it starts. I guess you can set it to read a certain procedure with the locks and your golden. However, i don't know anyone that actually has this system...
|
larry
R/T
8/05/2002
17:55:25
| RE: Remote Start installed ....
IP: Logged
Message:
you can go to www.omegaresearch.com and they have 3 differant remote add ons to any factory system using the lock unlock lock feature
|
NYSubDak
Dodge Dakota
JOIN HERE
8/05/2002
19:52:16
| RE: Remote Start installed ....
IP: Logged
Message:
I installed a remote starter in my truck with 5-spd. Most places these days will not install one in a manual because of liability reasons. You see, you have to wire the unit to bypass the clutch switch to start the truck. Unfortunately, there is no way for the processor to verify the tranny is in neutral before bypassing the clutch switch. If the vehicle is not in neutral, it will roll on startup, hence the liability. I wired in a microswitch in series with the clutch bypass switch, and attached it to the parking brake arm such that pressing the parking brake down hard, activates the switch, allowing the start. I though to use the switch already on the parking brake, but it is a ground interupt switch and wont support a relay. It is still dangerous to some extent, If I leave it in gear and auto start it and the brake doesn't hold the truck, lookout! On an auto, there is a switch to tell the unit if the vehicle is in park or neutral. Honestly, it's probably not worth it on a manual.
Wade
|
JIM
Dodge Dakota
JOIN HERE
8/05/2002
21:57:03
| RE: Remote Start installed ....
IP: Logged
Message:
If you buy a remote start/alarm combo w/ keyless entry for about $200 you can throw out the factory remote and just use the alarm's remote. Remember whatever the stock system ustes for the remote it doesn't matter you wire the new unit off your power lock switch.
|
EyeTrip
R/T
8/05/2002
22:03:01
| RE: Remote Start installed ....
IP: Logged
Message:
I was just looking at a setup for $85 from some .com CO (truck accessories)
HomePage
|
Knobbyman
*GenIII*
8/06/2002
09:53:25
| RE: Remote Start installed ....
IP: Logged
Message:
Larry .. i think that's what I'm looking for but www.omegaresearch.com takes me to a brokerage site.
'01 Graphite QC 4x4
4.7 3.55 LSD
4.5" Customized Suspension Lift
305x70x16 GoodYear MT/R's
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
go_n_low
Dodge Dakota
JOIN HERE
8/06/2002
10:04:00
| RE: Remote Start installed ....
IP: Logged
Message:
The problem with a remote start that works off the factory transmitter is range. The factory only works for about 100 yards. Most aftermarket work for 500 yards or more. Mine works for almost 2 mi. (Factory claim) I have tested it at 1 mi. and it worked perfectly. It is made by Ungo.
Matt
|
Bill Smith
Dodge Dakota
JOIN HERE
8/06/2002
10:14:04
| RE: Remote Start installed ....
IP: Logged
Message:
try your local Auto Zone... we have remote start kits for around a 100 dollars. has a video and all . some vehicles do require a factory alarm bypass module thats seperate,so have the guys check your aplication. hope this helps-Bill
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
