| From | Message |
JLW
Dodge Dakota
JOIN HERE
7/21/2002
15:14:19
|
 Subject: transfer case removal Q's... help plz?
IP: Logged
Message:
I am in the process of replacing my transfer case in my 88 3.9l 4x4 5spd, i've got both drive shafts out all sensors and shift linkage disconnected and i all ready to start taking out the bolts hold it to the my tranny but i'm not sure how i can get at the top bolt, it seems almost inaccessible. Is there any trick or suggestions you can give, any help would be great, thanks a lot,
-jason
|
Art
Dodge Dakota
JOIN HERE
7/21/2002
15:17:22
|  RE: transfer case removal Q's... help plz?
IP: Logged
Message:
Just take out the trans cross member and lower the whole assembly down a bit with a floor jack so you can get to the top bolts
|
JLW
Dodge Dakota
JOIN HERE
7/21/2002
15:49:49
| RE: transfer case removal Q's... help plz?
IP: Logged
Message:
Thanks for the reply, 1 more question for you, how far can i safely lower the whole assembly down without stressing anything out. Thanks again,
-Jason
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
