| From | Message |
madmaxin22
Dodge Dakota
JOIN HERE
7/10/2002
22:27:28
|
 Subject: will r/t wheels bolt right up??
IP: Logged
Message:
to my 00 CC, i know bolt pattern is same but would i need to have backspacing or anything. i have the 15x8 6 spokish wheels now? any help
|
-=Dave=-
GenII
7/10/2002
23:36:36
|  RE: will r/t wheels bolt right up??
IP: Logged
Message:
Do you actually think that R/T's vary that much from Dakotas of the same year? Yes they bolt right up.
'95 Sport 2.5L 5 Speed
Custom air intake, gutted cat, Flow 40, 2/3 drop
11.792 @ 55.9 mph in the 1/8
|
imnotworthy
Dodge Dakota
JOIN HERE
7/11/2002
12:13:28
|  RE: will r/t wheels bolt right up??
IP: Logged
Message:
Dave,
You never know what stupid sh?t automakers do anymore. It wouldn`t suprise me at all if they did something strange.
Really like the smart a$$ remark in your response too. God forbid if anyone gets a straight answer without some type of ridicule!
"Yes they bolt right up" would have been sufficent.
|
Troy
Dodge Dakota
JOIN HERE
7/11/2002
12:43:38
| RE: will r/t wheels bolt right up??
IP: Logged
Message:
Yes, they work fine. No spacers or anything needed.
|
5pnt9ltrluv
R/T
7/11/2002
12:52:06
| RE: will r/t wheels bolt right up??
IP: Logged
Message:
Actually, the wheel may stick out just a bit on the sides, unless you have the fender flares. Then you should be ok.
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
James
GenIII
7/11/2002
18:32:02
| RE: will r/t wheels bolt right up??
IP: Logged
Message:
My next upgrade is the chrome R/T wheels. I'm not happy with the Eagle 1469's on it now, so I'm saving my mountain dew money for a new R/t set.
That's a sharp lookn' ride you have the 5pnt9.
02 QC 4x4, 5.9L/auto, 3.92/LSD, Leather, SLT Plus
|
5pnt9ltrluv
R/T
7/11/2002
20:13:24
| RE: will r/t wheels bolt right up??
IP: Logged
Message:
http://www.digifuge.com/rt7.JPG
Here is a current pic. The one in the profile is a few months old. I have to resize the current pic so that I can use it. But here it is....
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
madmaxin22
Dodge Dakota
JOIN HERE
7/11/2002
21:04:25
| RE: will r/t wheels bolt right up??
IP: Logged
Message:
thanx guys who werent d1cks, i knew the bolts were the same but wasnt sure on backspacing, nice dakota dave :-(
|
James
GenIII
7/11/2002
21:20:58
| RE: will r/t wheels bolt right up??
IP: Logged
Message:
Yep, those wheels will look very nice on my ride with some Wrangler M/T's wrapped around them.
Very nice.
02 QC 4x4, 5.9L/auto, 3.92/LSD, Leather, SLT Plus
|
-=Dave=-
GenII
7/11/2002
23:23:56
|  RE: will r/t wheels bolt right up??
IP: Logged
Message:
Yeah, I didn't call you any names. You hurt my feelings :(
You are going from an 8" wide wheel to a 9" one. The backspace doesn't change much if at all, which is why R/Ts have the fender flares.
'95 Sport 2.5L 5 Speed
Custom air intake, gutted cat, Flow 40, 2/3 drop
11.792 @ 55.9 mph in the 1/8
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
