| From | Message |
DakotaMan2002
Dodge Dakota
JOIN HERE
7/06/2002
18:14:48
|
 Subject: Just installed home-brew intake today
IP: Logged
Message:
Hey all I just installed a home-brew K&n intake 2day.
Just thought I'd share with everyone. Check it out...its under Current Mods...
http://2002dakotasport.netfirms.com
Questions, comments, donations are always welcome.
DakotaMan2002
|
PIMPDADDY DON
Mechanic
7/06/2002
18:33:16
|  RE: Just installed home-brew intake today
IP: Logged
Message:
BRO, dont let me kick ya in the nuts...... BUT make the entire thing abs plastic not pvc. it isnt thick enough. and to top that off, it looks good, but make it extend all the way to the throttle body. alot more better that way.
just my opinion, looks good though.
Don
http://www.dodgetruckworld.com/mygallery.asp?id=3361
|
DakotaMan2002
Dodge Dakota
JOIN HERE
7/06/2002
19:56:05
| RE: Just installed home-brew intake today
IP: Logged
Message:
Well PimpDaddy
Why make it thicker?...the PVC is already a 1/4 in thick.
Whats the pro's con's of making it ABS and not PVC.
And whats the difference if I leave it there now or move it up to the throttle body?
Thankx
|
handi2
GenIII
7/06/2002
22:36:18
| RE: Just installed home-brew intake today
IP: Logged
Message:
Sch. 40 ABS and PVC are the same thickness.
http://photos.yahoo.com/handi254310
2002 Quad Cab SLT Plus 4.7 Every Available Option
Access Tonnoue Cover/Bedrug/360 Air Intakez/Jet Stage 2
180 Robertshaw/Roadmaster Active Suspension
Street Scene Grill Inserts
|
kotadude21
Dodge Dakota
JOIN HERE
7/07/2002
00:58:06
| RE: Just installed home-brew intake today
IP: Logged
Message:
bandwidth has been met on the website so maybe i'll look back later
take a look at mine
www.geocities.com/kotadude21/intake.html
brent
|
helton
Dodge Dakota
JOIN HERE
7/07/2002
14:29:52
|  RE: Just installed home-brew intake today
IP: Logged
Message:
Hey, kotadude, did you have to make any supports for your intake? Also, when I relocate the sensor do I need to put any threads in the intake or any sealent on it when I put it in? By-the-by, it does look damn good, compared to the Airraid.
|
Kotadude21
Dodge Dakota
JOIN HERE
7/07/2002
22:45:14
|  RE: Just installed home-brew intake today
IP: Logged
Message:
whasssup man, i think you're the same guy that e-mailed me but the intake rests at the bottom on the filter and the fernco up top is tight enought to support it also.
Threading it is not necessary, silicone is not a bad idea once you screw it in there.
brent
www.geocities.com/kotadude21/mytruck.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
