| From | Message |
Aquadyne
Dodge Dakota
JOIN HERE
6/19/2002
02:15:40
|
 Subject: Removeing the A/C pulley
IP: Logged
Message:
Does the A/C compressor pulley just pull straight off ? I have the nut off I jsut want to make sure that I'm not missing something
|
Bernd
*GenIII*
6/19/2002
08:40:54
|  RE: Removeing the A/C pulley
IP: Logged
Message:
You'll need a clutch removal tool for the A/C unit.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Aquadyne
Dodge Dakota
JOIN HERE
6/19/2002
23:48:06
|  Thanks - how does
IP: Logged
Message:
It thread in ? When I remove the nut I don't see where the tool would thread in . I just get tired of the people at the A/C shops saying I will have to replace the compressor . Have you ever pulled the clutch and pulley off of a Dodge A/C unit ? 1993 vintage ? Thanks again .
|
Bernd
*GenIII*
6/20/2002
00:20:28
| RE: Removeing the A/C pulley
IP: Logged
Message:
Yes...and yes you'll need a tool for that. The tool doesn't thread in but rather holds the clutch from turning so you can get the nut off and remove the clutch. Then, you'll need some snap-ring pliers to remove the snap ring from the clutch...and then, you'll need a clutch removal tool to remove the pulley.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Aquadyne
Dodge Dakota
JOIN HERE
6/20/2002
02:39:35
|  Gotcha !
IP: Logged
Message:
Thanks ..Bless you my son !
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
