Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
03:18:04 - 12/24/2024

General Dakota Board
FromMessage
chad
Dodge Dakota
JOIN HERE
 Email

6/18/2002
21:21:27

Subject: dakota wont start pos
IP: Logged

Message:
94 318 ,no spark at all, no power to the coil. ive tried
jumpering the auto shut off relay, gets power but still no signal from the hall effect(guessing) gas pressure was about 3-5# over what the haynes manual says.

i opened up the wire loom, the red/white wires respiced those under the pdc.

what the hell makes the spark, ive replaced the hall sensor, coil, cap/rotor, battery, plug wires.

if the computer is bad can i get a new one and where should i look. parts stores dont have them.



Dak318
Dodge Dakota
JOIN HERE


6/18/2002
22:12:39

RE: dakota wont start pos
IP: Logged

Message:
IF the computer is bad you have to either get one from mopar or get one from a Dodge Dealership



chad
Dodge Dakota
JOIN HERE
 Email

6/18/2002
22:17:48

RE: dakota wont start pos
IP: Logged

Message:
the computer is buzzing pretty bad, is this normal? can someone turn there ignition on and tell me if they hear the comptuer buzz from about
10 feet away.

how much is a computer gonna cost me is there a website. sorry im a ford guy dont know squat about mopar. lucky me im learning.



nuckenfuts
Dodge Dakota
JOIN HERE
 Email

6/19/2002
12:22:22

RE: dakota wont start pos
IP: Logged

Message:
boneyard,....$100.oo, or if yur a rebel go to pick a parts pull it out yurself put it in the back of ur pants and buy a door handle or somthing.



dak318
Dodge Dakota
JOIN HERE


6/19/2002
14:36:11

RE: dakota wont start pos
IP: Logged

Message:
The refurbished stock computer is between $160 and $225 plus a core charge on mine.

91 Sport 318



Todd W
GenIII
 User Profile


6/19/2002
15:13:47

RE: dakota wont start pos
IP: Logged

Message:
Considering the computers have no moving parts, I wouldn't think it should be 'buzzing'. At least, not audiable from 10 feet away.



'00 RC Sport Forest Green, 3.9L, 5-speed 3.55, Hurst Comp-Plus Shifter, Clear-Corners, Speed-Glo gauges, Airaid Intake with relocated IAT, Autolite 3923s, Ported Throttle Body, Borg & Warner Cap/Rotor, Accel Coil, JBA 9mm Wires, JET Stage II

Slanty Shanty
Dodge Dakota
JOIN HERE
 Email

6/19/2002
15:24:41

RE: dakota wont start pos
IP: Logged

Message:
Been gettin paid to work with computers for many years now, and I'm not sure that I have ever heard one buzzz??? well, the power supply, but you're talking truck computer huh... huh dude, RUN!!!! it's gonna 'spload!!!



chad
Dodge Dakota
JOIN HERE
 Email

4/19/2003
15:41:25

RE: dakota wont start pos
IP: Logged

Message:
ok itll be a year since this truck has ran, i guess im gonna have it towed because im so sick
of seeing it in my garage. i read all the posts
about not starting and ive tried 50% of the ideas.
only thing left is to spend every last nickle i have buying new sensors and bs. so calling the tow truck monday morning.

by the way i had it towed before, the shop said they fixed it. bastards im sure it just started on its own and charged me 100$ labor. in the past it would just start out of the blue, but it hasnt started in a long time now.



dakotaguy92
Dodge Dakota
JOIN HERE


4/19/2003
22:41:42

RE: dakota wont start pos
IP: Logged

Message:
did you try a new ignition switch, neutral safety switch , the starter, the battery, the shift linkage, the key and tumbler.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.