| From | Message |
AcrophobiA
Dodge Dakota
JOIN HERE
6/18/2002
14:19:22
|
 Subject: Changing Spark Plugs
IP: Logged
Message:
I'm going to attempt to change my spark plugs in my 1999 3.9 V6 in a couple days. I read some other posts and I think I'm going to go with the standard copper Autolite ones. Are they fairly easy to change out? Is anything else required besides taking the old ones out and putting the new ones in?
|
dan
Dodge Dakota
JOIN HERE
6/18/2002
14:21:02
| RE: Changing Spark Plugs
IP: Logged
Message:
make sure they are gapped properly first
|
Chris W
Dodge Dakota
JOIN HERE
6/18/2002
19:22:12
| RE: Changing Spark Plugs
IP: Logged
Message:
It helps if you change them on a cool engine.
|
Dakaty
GenIII
6/18/2002
19:55:55
| RE: Changing Spark Plugs
IP: Logged
Message:
Be very careful not to cross thread the new plugs when installing.
Use a short (3" long) piece of 1/4" fuel line, force it over the small end of the plug and use it to hand tighten the spark plug into the head.
|
AcrophobiA
Dodge Dakota
JOIN HERE
6/19/2002
00:36:56
| RE: Changing Spark Plugs
IP: Logged
Message:
thanks for the advice...how do i find out what to gap them at?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
