| From | Message |
Nicholas
Dodge Dakota
JOIN HERE
5/25/2002
21:04:53
|
 Subject: Lug Size and jack Points
IP: Logged
Message:
I have to clean my rims tomorrow cause they look like total crap on the inside. I have an 01 Motorsports Edition Dak with the black rims, and the brake dust etc. is slowly building on the inside of the rim, and I wanna clean them. But, I dont feel like walking out to my truck to get the manual to locate the proper jack points and lug size. So, if anyones got them off hand, I would appreciate it! Thanks
|
BlackDakRacer
Dodge Dakota
JOIN HERE
5/25/2002
21:51:18
|  RE: Lug Size and jack Points
IP: Logged
Message:
Use the lug wrench that came with your truck or it is on the universal jack. As for jack points, any spot on the frame works, no suspension cuz it won't do crap, and have your truck on a flat surface, no sloping driveways.
~~Eric
|
Nicholas
Dodge Dakota
JOIN HERE
5/25/2002
22:11:44
| RE: Lug Size and jack Points
IP: Logged
Message:
The hell with the POS wrench that game with the truck, lol, I like my pnumatic tools! lol. Im all about the Impact! As for the frame, I know ANY spot would work, but I know there are spacific spots for jacking, im not one for just "jacking" anywhere.
|
intense99dak
Dodge Dakota
JOIN HERE
5/25/2002
22:46:58
| RE: Lug Size and jack Points
IP: Logged
Message:
For the front wheels I jack under the shock mount on the lower control arm. For the rear I center the floor jack on the rear axle and when it's up I use two jackstands under the axle.
Chuck Robbins
'99 IB Dakota Sport
Visit my site at intense99dak.com
|
kota on 20s
GenIII
5/26/2002
00:47:23
| RE: Lug Size and jack Points
IP: Logged
Message:
the lugs are 3/4 and i put the jack on any part of the frame. never had a problem
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Nicholas
Dodge Dakota
JOIN HERE
5/26/2002
09:39:13
| RE: Lug Size and jack Points
IP: Logged
Message:
3/4?? hmm.. I thought they woulda used metric to fu*$ everyone up! Damn POS, Half SAE, and half Metric!
|
MightyDakSXT
GenIII
5/26/2002
15:58:34
| RE: Lug Size and jack Points
IP: Logged
Message:
It amazes me how many people don't read their owner's manual. It tells you in black and white with diagrams where to jack yours truck up. I can understand if the manual is lost, but geez...
2002 SXT, 3.9 Liter V6, RC, 5-speed, 3.55 rear
-={ Second place is the first loser.} =-
Extang Tonneau, Autolite 3923 Plugs, Borg Warner Cap & Rotor, K&N Filter, Gibson Catback Exhaust, Robert Shaw 180 Degree T-stat, Custom Grille, Modified V8 TB. Coming soon: Quick D Air Intake
|
Nicholas
Dodge Dakota
JOIN HERE
5/26/2002
18:08:40
| RE: Lug Size and jack Points
IP: Logged
Message:
I could read my manual, but it was late last night, and I really didnt feel like walking out to my truck in the rain to look at the damn thing. Just as easy to ask someone, then having to flip through pages.
|
best pron
Dodge Dakota
JOIN HERE
12/20/2018
12:39:45
| SIqIbxEGiRqJqz
IP: Logged
Message:
ASKIrM Very nice post. I just stumbled upon your weblog and wished to say that I ave really enjoyed browsing your blog posts. After all I all be subscribing to your feed and I hope you write again soon!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
