| From | Message |
Quadman74
Dodge Dakota
JOIN HERE
5/20/2002
15:51:29
|
 Subject: Water in Clear Corner
IP: Logged
Message:
Wondering if anybody has had any problems with water getting into the passenger side diamond clear corners. Driver side is fine. If so what did you do to correct it.
|
joe_himself
Dodge Dakota
JOIN HERE
5/20/2002
15:56:12
|  RE: Water in Clear Corner
IP: Logged
Message:
I have only had a problem with getting water in the passenger side fog light. thats it.. not the clears.. drill a small hole in the bottom of it to drain it .. i know you probably dont wanna because they are your new clears.. but still.. will keep the water level down..
|
BlackDak02
*GenIII*
5/20/2002
17:49:22
|  RE: Water in Clear Corner
IP: Logged
Message:
I have the APC diamond clears with no problems. These are factory vented so there shouldn't be a problem with condensation. I'd pull the light and check it over thoroughly to see why this is happening. Check the vent to see if it is clogged. Dunno, maybe the plastic flashed over when it was molded clogging the vent hole.
2002 Black CC SLT 4x4
4.7L 45RFE 3.55 LSRD
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
