| From | Message |
Brad1599
Dodge Dakota
JOIN HERE
6/19/2002
00:22:09
|
 Subject: RE: Wheels-how wide can you go?
IP: Logged
Message:
I seen sharp lookin 2wd Ranger RC today at work. It had 15X10 inch primewheels with 275/60/R15's. I was wonderin would 15X10s fit on my 2001 Dakota 2wd RC without scrubbing.If not what about 15X9s, Where can I go to get a good deal on rims. Any suggestions??
|
Bob W
GenIII
7/20/2002
16:54:32
|  RE: Wheels-how wide can you go?
IP: Logged
Message:
Do you think 18 x 8.5 KMC rims with 295 45 18 will work on my truck.
Gibson headers, Gibson Cat-back, Edelbrock IAS shocks, K & N drop in, 180 stat, Jet stage II chip, ARE Lid
|
StanBo
Dodge Dakota
JOIN HERE
7/30/2004
23:38:30
| RE: Wheels-how wide can you go?
IP: Logged
Message:
Brad1599 were you ever able to test fit or get the 15x10s?
275/60/15 sounds like a great size and the 15x10 would give a great deal of dish.
|
Hemi Dakota
Dodge Dakota
JOIN HERE
7/31/2004
10:42:11
| RE: Wheels-how wide can you go?
IP: Logged
Message:
Has anyone tried putting the new viper style 18x10s on their dakotas, I'm thinking about buying a set if someone has any pics.
Thanks
|
IdahoRT
Dodge Dakota
JOIN HERE
7/31/2004
11:26:22
| RE: Wheels-how wide can you go?
IP: Logged
Message:
You can use Viper-sized wheels, but you have to have them made with correct backspacing.
I run 18x10 on the front and 18x13 on the rear. There is no rubbing, even at full lock or over bumps (with Hotchkis suspension). Front tires are 295/35/18 and rears are 335/30/18.
Here's a photo:
|
Hemi Dakota
Dodge Dakota
JOIN HERE
8/03/2004
18:41:11
| RE: Wheels-how wide can you go?
IP: Logged
Message:
where did you get you rims from, every site that I have found say that they are out or can't get them anymore.
|
mbowen
Dodge Dakota
JOIN HERE
5/08/2013
17:17:23
| RE: Wheels-how wide can you go?
IP: Logged
Message:
I have a 04 dakota with the 16x9 factory wheels and wanted to
know if the viper 18x13 rears would fit as my rears. Any adivce
is helpful.
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
