Forums
Forum Tools
|
 |
00:15:13 - 12/20/2024
General Dakota Board
| From | Message |
stevo
Dodge Dakota
JOIN HERE
5/01/2002
16:40:15
|
 Subject: Y Pipe
IP: Logged
Message:
will the old y pipe work on a new set of headers on a 3.9 or will i have to replace the old one with a new one? if it needs to be replaced does anyone know where i can get one? thanks
black 3.9, headers on the way, ram air hood on the way, 180 therm, 8.5 mm wires, 3923's, accel coil, cold air intake, stage 2 chip, 3" Gibson cat back (deciding on the tb)
|
Dakota Bob
GenII
 
5/01/2002
16:48:53
|  RE: Y Pipe
IP: Logged
Message:
Mine is a 94 3.9 and the Y pipe hooked right up to it, you might have to pull or push one side a little. Hope this helps.
Bob
Cincinnati
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Split Fire Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, JBA Wires, MSD Blaster SS Coil
|
stevo
Dodge Dakota
JOIN HERE
5/01/2002
17:08:07
| RE: Y Pipe
IP: Logged
Message:
prec. dakota Bob...so they should bolt right up...maybe a little tuggin or pushing here or there! cool! i like a good challenge, can't wait to get them on. does anyone here have them on there 98? if so let me know how long it took ya and how tuff it actually was! thanks all!
|
intense99dak
Dodge Dakota
JOIN HERE
5/01/2002
17:13:47
| RE: Y Pipe
IP: Logged
Message:
I have the JBA's on my '99 and installation wasn't too bad. The instructions JBA gives are pretty straight forward.
The first thing you'll want to do is pick up some penetrant and soak the manifold bolts overnight for a couple days. They can come out rather dry and if they snap you're screwed. Keep the penetrant handy when you're taking out the bolts and if you feel any resistance spray them down again and wait a couple minutes.
As for installation, it took me a couple hours to do everything. The worst part of the installation was getting the rear bolt on the driver's side in as there's very little room to turn a wrench.
Chuck Robbins
'99 IB Dakota Sport
www.intense99dak.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
