Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:18:14 - 12/20/2024

General Dakota Board
FromMessage
handi2
GenIII
 Email User Profile


3/16/2002
21:53:41

Subject: 360 Air Intakez..size..?
IP: Logged

Message:
I have a 2002 4.7 and installed the 360 air intake today. I had the Airaid system.
The thing I noticed is that the pipe is barely the same size as the ID of the throttle body and the rubber coupling was super tight to get over the throttle body. It seems the kit is for the 65mm TB. Anyone else w/the 360 air intakez give me some answers on their fit with either TB.
Thanks



http://photos.yahoo.com/handi254310

2002 Quad Cab SLT Plus 4.7 Every Available Option
Access Tonnoue Cover/Bedrug/Airaid Intake/Jet Stage 2
180 Robertshaw/Roadmaster Active Suspension

CThomp
Dodge Dakota
JOIN HERE


3/17/2002
01:40:13

RE: 360 Air Intakez..size..?
IP: Logged

Message:
I have a "00 with the 65mm. It was a tight fit getting it on the 65 as well. I'm wanting to upgrade to a 68mm TB here soon and it's good to know that the 360 coupling will fit. Was it that much of a pain?



handi2
GenIII
 Email User Profile


3/17/2002
09:57:50

RE: 360 Air Intakez..size..?
IP: Logged

Message:
It was real tight but it will go on. The thing that bothers me is that if they are going to build one it should be the same size of the TB even if they just swedge the end to make it larger. And as in the original post, the pipe is barely larger than the TB inside diameter.

http://photos.yahoo.com/handi254310

2002 Quad Cab SLT Plus 4.7 Every Available Option
Access Tonnoue Cover/Bedrug/Airaid Intake/Jet Stage 2
180 Robertshaw/Roadmaster Active Suspension

Dr.Dakota
Dodge Dakota
JOIN HERE
 Email

3/18/2002
16:04:45

RE: 360 Air Intakez..size..?
IP: Logged

Message:
That rubber peice IS tight. I just dropped mine into a pot of boiling water for about 30 seconds. It warmed it up just enough to stretch it over the TB.



o yah
Dodge Dakota
JOIN HERE


3/18/2002
19:00:50

RE: 360 Air Intakez..size..?
IP: Logged

Message:
i was just about to order a 360 intake. i got a 00 4.7 auto. Is this a good quality product? cuz i was reading on the site about how the guy makes them in his garage. I just wanted to make sure b4 i got one. O yeah, also how much of a difference power wise did it make.... thanx in advance



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.