| From | Message |
dakotaman
Dodge Dakota
JOIN HERE
3/09/2002
01:05:37
|
 Subject: TB cleaning???......
IP: Logged
Message:
I have 36k miles on my truck now and it will stall on occasion on idle or while driving. will cleaning the throttle body take care of this?
|
CW
GenIII
3/09/2002
11:22:00
|  RE: TB cleaning???......
IP: Logged
Message:
Probably it is worth a shot.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm TB, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat, Electric fan Convertion, HO cams.
Working on adjustable fuel pressure with return.
|
Dakota Bob
GenII
3/09/2002
11:36:24
|  RE: TB cleaning???......
IP: Logged
Message:
Take off your IAC motor and clean it also be sure not to loose the rubber O Ring.
Bob
Cincinnati
Jet chip stage 1 JBA Headers,19# fule Injectors,Flow master 40s Auto Lite 3923 K/N Chrome Filter 180 T Stat ,TPS adjusment,Flometrics throttle body
|
Tad_W
Dodge Dakota
JOIN HERE
3/09/2002
13:36:52
| RE: TB cleaning???......
IP: Logged
Message:
Cleaning solved our problem. Definitely clean the idle air control on yout throttle body. I think when it gets dirty, it lets in too much air and stalls the vehicle.
|
PSU
Dodge Dakota
JOIN HERE
3/09/2002
13:42:05
| RE: TB cleaning???......
IP: Logged
Message:
well i cleaned the throttle body...the blades and the inside of the throttle body had a good amount of black "mush". Started up a few times and ran fine...where is the idle air control on the throttle body???
|
CW
GenIII
3/09/2002
15:11:37
| RE: TB cleaning???......
IP: Logged
Message:
The black round cylinder on the rear of the TB.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm TB, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat, Electric fan Convertion, HO cams.
Working on adjustable fuel pressure with return.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
