| From | Message |
4.7dak
Dodge Dakota
JOIN HERE
2/25/2002
17:26:45
|
 Subject: mopar performance pcm
IP: Logged
Message:
I was thinking about getting one of these...will this remove the speed limiter
|
kevster
Dodge Dakota
JOIN HERE
2/25/2002
19:01:35
|  RE: mopar performance pcm
IP: Logged
Message:
I to was looking into this, I really dont know and neither does the parts guy at the dealer, and the book doesnt say at all. so it would be more of a CHANCE, but I feel it is raised to 112 from 97 mph.. because of the S-rating tires. S tires are good for 112 mph top speed.If you buy one keep us posted.I would rather buy from Dodge than have mine reflashed, Dodge knows what they are doing in the set ups of this motor..
|
CW
GenIII
2/25/2002
19:04:55
| RE: mopar performance pcm
IP: Logged
Message:
There is still a speed limiter on the MP computers but I think it is set at something like 140
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, HO cams installed.
Working on adjustable fuel pressure with return.
|
slider_buck
Dodge Dakota
JOIN HERE
2/26/2002
05:37:42
|  RE: mopar performance pcm
IP: Logged
Message:
had mine going about 122 with the mopar computer. i let off of it then don't know how much faster i could have gonen
|
kevster
Dodge Dakota
JOIN HERE
2/26/2002
18:08:32
| RE: mopar performance pcm
IP: Logged
Message:
Slider buck, you have the Mopar pcm High Perf. in your 4.7 Dak? is this auto trans as well? and did you notice better performance overall? over the stock PCM.
|
dbbaker
Dodge Dakota
JOIN HERE
2/26/2002
19:10:11
| RE: mopar performance pcm
IP: Logged
Message:
so how much did it set you back dollar wise and what kind of horsepower gains are they claiming?
|
handi2
GenIII
2/26/2002
19:57:34
| RE: mopar performance pcm
IP: Logged
Message:
I don't think they make a mopar ho computer for the 4.7. If they do I want one..!
2002 Quad Cab SLT 4.7 Every Avaiable Option
Bed Rug/Access Tonneau Cover/2"by3" drop
Airaid Intake/Jet 2/Roadmaster Suspension/Bed Extender
|
CW
GenIII
2/26/2002
20:00:50
| RE: mopar performance pcm
IP: Logged
Message:
Nope if they did I would aready have one.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, HO cams installed.
Working on adjustable fuel pressure with return.
|
slider_buck
Dodge Dakota
JOIN HERE
2/26/2002
20:25:44
| RE: mopar performance pcm
IP: Logged
Message:
i have a 99 r/t. i really didn't notice a big difference with just it alone but when i added the m1 along with it there was a big difference. my gtech showed about 30 h.p.
|
kevster
Dodge Dakota
JOIN HERE
2/26/2002
21:03:44
| RE: mopar performance pcm
IP: Logged
Message:
My dealer shows in the book, A HP pcm for the 4.7. I seen it. 400.00 I believe. It just doesnt say if the speed limiter was increased, buying this is trial and error.
|
Chops
Dodge Dakota
JOIN HERE
2/26/2002
21:27:42
| RE: mopar performance pcm
IP: Logged
Message:
I dont know about the 4.7 stock limiter but on the 5.9 without its 115, 135 with.
|
handi2
GenIII
2/26/2002
21:27:45
| RE: mopar performance pcm
IP: Logged
Message:
My dealer shows the same thing but CW says they are for the Jeep 4.7 liter.
2002 Quad Cab SLT 4.7 Every Avaiable Option
Bed Rug/Access Tonneau Cover/2"by3" drop
Airaid Intake/Jet 2/Roadmaster Suspension/Bed Extender
|
Joe
Dodge Dakota
JOIN HERE
2/26/2002
22:48:08
| RE: mopar performance pcm
IP: Logged
Message:
There is no 4.7 PCM in the 2002 MP catalog, (see page 198). There was a P.N in the 2001 MP cat, but the dealer said that parts never existed.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
