| From | Message |
andrew
Dodge Dakota
JOIN HERE
2/21/2002
00:09:14
|
 Subject: I need HELP!!!
IP: Logged
Message:
After struggling with it for about 45 minutes I threw in the towel. For some reason, I cant get my oxygen sensor off my 93 dakota with 318. Is this reverse thread or what? I even rented a special socket for the thing. I also tried soaking it in PB Blaster with no luck. I cant even get in there with a hammer. Please help, I got smog on saturday!!!!
|
kota on 20s
GenIII
2/21/2002
00:37:52
|  RE: I need HELP!!!
IP: Logged
Message:
the threads are normal (righty tighty, lefty loosey. hehe), when i did mine, i gave it a couple of soakings with WD-40, and everything was went as clock work.
i guess it helped me that my truck has 5 years less rust than yours.
good luck
Eric
|
Wilson
Dodge Dakota
JOIN HERE
2/21/2002
11:58:32
| RE: I need HELP!!!
IP: Logged
Message:
Maybe try a little heat on it if you're replacing it, sorry can't think of anything else.
|
kota on 20s
GenIII
2/21/2002
12:03:09
| RE: I need HELP!!!
IP: Logged
Message:
heat makes metal expand and you will never get it off. work on the truck when its the coldest! like first thing in the morning before you start it
Eric
|
Wilson
Dodge Dakota
JOIN HERE
2/21/2002
12:28:59
| RE: I need HELP!!!
IP: Logged
Message:
Sorry Kota, but you are wrong, you apply the heat to the fitting that is welded to the exhaust that the sensor is screwed into. Sorry that I was not more clear in my first post.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
