| From | Message |
Dr0p0ff
GenIII
 
2/18/2002
08:12:09
|
 Subject: ECOTEK??
IP: Logged
Message:
hey, anybody heard anything about this product. i found it in a buddies ricer mag. here's the site.
www.ecotekplc.com
Sgt G
|
xplikt
Dodge Dakota
JOIN HERE
2/18/2002
09:50:57
|  RE: ECOTEK??
IP: Logged
Message:
OMG, they built it in FrontPage, good luck with their sales.
The Ecotek CB-26P can be fitted directly in the inlet manifold or to a vacuum servo/breather hose close to the inlet manifold. It is a non return valve with a Venturi construction which injects minute quantities of agitated air into the manifold at certain specific pressures. Whilst this will lean the mixture very slightly the quantities of air are so small as to make little difference (5% approx) but they are sufficient to create the turbulence necessary to produce such a dramatic improvement in combustion efficiency. Such improvements more than overcome the slight leaning of the mixture and practical experience has shown that many engines actually run cooler with the device fitted.
|
Dr0p0ff
GenIII
2/18/2002
11:32:32
| RE: ECOTEK??
IP: Logged
Message:
yeah.. thanks for the direct quote from the website.. i read that
anybody with some other information?
Sgt G
|
toast
Dodge Dakota
JOIN HERE
2/18/2002
14:33:08
| RE: ECOTEK??
IP: Logged
Message:
Hold on i am trying to retrofit my Echo blower on my TB to i can get that extra hp.lol
|
Dr0p0ff
GenIII
2/18/2002
14:57:50
| RE: ECOTEK??
IP: Logged
Message:
nm.. being that you guys don't even have the money to pay for a membership to the site that you get valuable information from, i suppose i'll buy it (as i DO have a job, and i HAVE graduated high school) and do the testing for my own ass when i get back form the f*ck!ng middle east in 6 months. does one out there have ACTUAL info on whether they know/think it'll will/should work or not?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
