From | Message |
Rison Dodge Dakota JOIN HERE
2/16/2002 13:39:39
|
Subject: I have a durango 5.9. Wont start! IP: Logged
Message: It has 20k miles. Its not cold out. code shown when turning key is p 0320. I hear fule pump when i turn the key. It has been sitting for like 2 weeks. It has stock alarm and only thing abnormal is I hit panic like a week ago. Please any info before it goes to dealer monday. thanx!
|
Dakota 2 Time Dodge Dakota JOIN HERE
2/16/2002 14:47:13
| RE: I have a durango 5.9. Wont start! IP: Logged
Message: As per the All Par site:
0320
Crankshaft position sensor reference signal cannot be found while the engine is cranking.
Sounds like sensor is mispositioned or shot. Should be covered under warranty.
|
Anthony Dodge Dakota JOIN HERE
2/16/2002 15:49:02
| RE: I have a durango 5.9. Wont start! IP: Logged
Message: I had the 0320 code about 4months ago on my Dak, bad sensor. The truck still ran and drove perfect, only thing was the engine light.
My boss had the same problem with his 99 5.9 Durango, it wouldn't start after sitting for acouple of weeks. The battery was the problem, he charged it and the truck was fine. Even though the battery wasn't dead.
Anthony
www.geocities.com/intense79/
|
Rison Dodge Dakota JOIN HERE
2/16/2002 16:10:59
| RE: I have a durango 5.9. Wont start! IP: Logged
Message: Thanx. I had no check engine light at all so it probably the sensor just bit the dust.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|