| From | Message |
Mig-29
Dodge Dakota
JOIN HERE
2/06/2002
22:41:29
|
 Subject: QC bed movement
IP: Logged
Message:
I have noticed the the bed on my 02 QC 4x4 seems to have movement when going over normal bumps in the road. I look in the drivers rear view mirror and can see the drivers side of the bed seems like it has excessive movement. I have owned a 98 CC dak 2wd and now own a 2000 CC dak 2wd and never noticed this. But today I drove another 02 QC 4x4 and it also had the same movement of the bed when going over bumps. Has anybody else noticed this and if so do you think it is normal?
It seems to be a QC thing .
|
Tim™
Dodge Dakota
JOIN HERE
2/06/2002
22:47:26
|  RE: QC bed movement
IP: Logged
Message:
I have this problem as well. I own the QC 4x2 though.
I wonder if adding a bedliner and tonneau cover will minimize the shaking?
Tim™
|
Dan H
Dodge Dakota
JOIN HERE
2/06/2002
23:07:06
| RE: QC bed movement
IP: Logged
Message:
I've had a 2000 4x2 and a 2001 4x4. Both have the bed movement you describe. My '97 CC did not.
Dan
|
YJ
Dodge Dakota
JOIN HERE
2/07/2002
17:26:05
| RE: QC bed movement
IP: Logged
Message:
I have a 2K quad cab 4x4. It moves a bit on bumps. Oh, and it squeaks. ;). Seems ok, doesn't seem to shift out of place at the end of the day. I have a bed-liner and 95lb. ARE tonneau cover on it.
|
Joel
Dodge Dakota
JOIN HERE
2/07/2002
17:59:58
| RE: QC bed movement
IP: Logged
Message:
Its normal & its not the bed moving, its the cab.
Joel
|
YJ
Dodge Dakota
JOIN HERE
2/07/2002
18:06:59
| RE: QC bed movement
IP: Logged
Message:
The entire frame twists.
|
Mig-29
Dodge Dakota
JOIN HERE
2/07/2002
20:13:49
|  RE: QC bed movement
IP: Logged
Message:
Yeah guys thanks for the replies I took a good look at my 2000 CC dak today and it also moves not as much as my 2002QC dak and I bet my 1998 CC dak did the same.
|
lee
Dodge Dakota
JOIN HERE
2/07/2002
21:08:00
| RE: QC bed movement
IP: Logged
Message:
I was under the back of my '01 QC tonight and I noticed some sort of torsion link between the framerails. Is this supposed to help reduce the frame twist in some way?
Lee
|
Noah Heflin
Dodge Dakota
JOIN HERE
2/15/2002
00:25:37
| RE: QC bed movement
IP: Logged
Message:
My bed doesnt move at all, it just doesnt sit straight on the frame. One side sticks out further than the other.
|
LEWNDI
Dodge Dakota
JOIN HERE
2/15/2002
08:41:37
| RE: QC bed movement
IP: Logged
Message:
Noah
Read back thru these posts and you'll see lots of complaints of beds not sitting straight. It should be covered on your warranty.
|
Noah Heflin
Dodge Dakota
JOIN HERE
2/15/2002
12:00:56
| RE: QC bed movement
IP: Logged
Message:
LEWNDI,
Thanks for the tip, but mine has 57,000 on it, warranty ran out last year.
|
Dave Mitchell
Dodge Dakota
JOIN HERE
2/19/2002
12:34:49
| RE: QC bed movement
IP: Logged
Message:
The cab is rubber mounted. The cab is moving on the frame. The bed is not rubber mounted.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
