| From | Message |
Mike W.
Dodge Dakota
JOIN HERE
2/06/2002
15:59:32
|
 Subject: Proper Torque???
IP: Logged
Message:
Whats the proper torque adjsutment for the stock aluminum rims?
Thanks.
|
Tim S.
Dodge Dakota
JOIN HERE
2/06/2002
16:23:12
| RE: Proper Torque???
IP: Logged
Message:
Check the manual, but I think between 85 and 115
ft/lbs.
Tim Schafer
'01, QC, 2wd, v-6, homemade-behind the crossbox cover, noisy ventshades,musty air cond.,patriot blue over silver.etc, etc,
|
Craze
Dodge Dakota
JOIN HERE
2/06/2002
16:23:23
|  RE: Proper Torque???
IP: Logged
Message:
My 2002 service manual says 85 to 115 ft.lbs. I torqued mine to 100.
|
xplikt
Dodge Dakota
JOIN HERE
2/06/2002
19:40:49
| RE: Proper Torque???
IP: Logged
Message:
I also did them at 100. Not very specific if you ask me, a pretty wide range.
|
CW
GenIII
2/06/2002
20:01:15
|  RE: Proper Torque???
IP: Logged
Message:
I torque them to 100 as well. The main thing is that they are evenly torqued.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.
|
Mike W.
Dodge Dakota
JOIN HERE
2/07/2002
08:57:54
| RE: Proper Torque???
IP: Logged
Message:
Thanks alot guys,
Hopefully that along with my new ball joints, tranny and brakes, will ahve me riding smooooth again.
-Mike
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
