Forums
Forum Tools
|
 |
00:30:29 - 12/20/2024
General Dakota Board
| From | Message |
Hank
Dodge Dakota
JOIN HERE
2/06/2002
10:54:25
|
 Subject: How to level the front end?
IP: Logged
Message:
I have a 99 4x2, I would like to level the front end with the rear, whats the best way to do this, coil spring spacer? if so, how big of a spacer?
-Hank
99 4x2 RC 3.9L 5-speed
Intense Performance Stage II, Painted Rims & Dash, Custom Interior Lighting, 255/75R15 Bridgestone Dueler HP Tires, Rear Leaf Spring Clamps
|
kevster
Dodge Dakota
JOIN HERE
2/06/2002
19:19:14
|  RE: How to level the front end?
IP: Logged
Message:
Uh you need to be more specific, you want the front raised to match the rear height?? And you have the 4x2 truck correct? If you want to raise the front you need to buy the polyurethane 1/2" spacer from truckn.com these go under the spring coil and provide more lift,these are used on the pre runner style kits. cost is only 30.00 pr i believe. but when reinstalling the springs you need a coil spring compressor and you can rent it from a rental place. Personnaly i would drop the rear to match front. use drop blocks. 1 0R 2 INCH BLOCKS work well. and much easier to do.Than the front.
|
CW
GenIII
2/06/2002
19:59:57
|  RE: How to level the front end?
IP: Logged
Message:
I leave mine with the rake bacuse I use it like a truck. Need the extra hight.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
