| From | Message |
Aquadyne
Dodge Dakota
JOIN HERE
1/31/2002
08:31:24
|
 Subject: A/C pulley removal ??
IP: Logged
Message:
Well I have my 1993 V6 ext. cab running like a top now .. I need to take the A/C pully off so I can replace the bearing . It is starting to roar . I put a shorter belt on that by-passed the A/C pulley on the compressor and gave it a spin and no doubt it needs to be replaced . My question is How do you hold the inner section still so that you can get the nut off ? Special wrench ? or am I missing something .
|
Kevin Smith
Dodge Dakota
JOIN HERE
2/09/2002
22:01:12
|  RE: A/C pulley removal ??
IP: Logged
Message:
There is a special spanner tool that holds the clutch pack while you spin the nut. You can usually use something with a pointed end and jam it in one of the holes to hold it.
|
CW
GenIII
2/10/2002
01:38:22
|  RE: A/C pulley removal ??
IP: Logged
Message:
I just use a 3/8 impact. Works like a charm.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
