| From | Message |
Bill in NY
Dodge Dakota
JOIN HERE
1/25/2002
07:59:22
|
 Subject: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Well, IAT was in my mailbox at 10am yesterday. (Thur.) Geeeeez, that arrived fast.
Anyway, it was installed within an hour later. I have an '01 QC. I removed the removable ashtray insert from my ashtray and drilled a whole the size of a dime in the back right hand corner and fed the IAT cable through that hole. The IAT adjuster fits in the ashtray like it was designed to fit there. Ashtray still opens and closes at a fingertips touch. Anyway, I found a completely free soft rubber grommet/plug on the passenger side firewall. I made a tiny slit in the center of that grommet and fed the IAT adjuster cable through there from the cab, (I used a bit of black atv sealant to seal up around the cable) out to the engine compartment, along the back engine compartment firewall and then to the area of the IAT sensor where it attached easily to the IAT sensor using the provided "Quick Connect" connectors. I ended up with about 4 inches extra cable which I left in the cab under the dash. To pretty the install up I took a few inches of flexible plastic cable covering and covered the area where I spliced. Anyway, install was clean and easy. Set the IAT adjuster "on" and to 70 and started the truck. No error reading noted so I assume all is well. Bill in NY
|
2001kota
Dodge Dakota
JOIN HERE
1/25/2002
09:33:40
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Is there any way that you could e-mail me some pics of the install...I'm currently researching where to put an IAT. My e-mail is gstrdr1@team2muchhp.com
Thanks
|
Bill in NY
Dodge Dakota
JOIN HERE
1/25/2002
09:52:49
|  RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Just emailed you photos. Very good ones I might add.. ho,ho,ho. IF anyone else is interested let me know and I will email the photos to you also. Bill in NY
|
dakota/cali
Dodge Dakota
JOIN HERE
1/25/2002
11:51:36
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
do you have a mopar pcm or jet chip also do the IAT adjusters work with them ? I want to get a new 70mm tb and I was going to get the IAT adjuster at the same time, but I'm waiting for some kind of reliable info I have Jet module and I dont know if it will work with it ! Any hel?
|
4wDakota
GenIII
1/25/2002
11:59:40
|  RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
You can send me some pics Bill. My IAT adjuster is sitting on my desk just waiting for warm weather!
Thanks,
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
|
ZenDak
Dodge Dakota
JOIN HERE
1/25/2002
12:15:41
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Ya Bill,,send me some pic.s too. I'm about to order mine,,,Summer's coming!
andy.henderson@ni.com
|
Bill in NY
Dodge Dakota
JOIN HERE
1/25/2002
12:41:33
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
This info found on SpeedTweaks web site:
The IAT Adjuster also enhances the overall performance of the other modifications and works very well with Headers, Aftermarket Throttle Bodies, and Custom PCM's (Tested with a Mopar Performance PCM as well). The IAT Adjuster does NOT work with the JET Chips as they use the same trick to adjust the fuel curve...for $170 more!
|
TNdat
Dodge Dakota
JOIN HERE
1/25/2002
14:25:56
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Hey is there a big diff in performance between jet 2 and IAT. is there one thats better. i have jet 2 and like it but IAT is better then why not get that. thanks for the input.
|
TNdat
Dodge Dakota
JOIN HERE
1/25/2002
14:31:39
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Hey fellows do one think that getting the comp flashed is better performer then IAT OR Jet2
|
CThomp
Dodge Dakota
JOIN HERE
1/25/2002
14:48:49
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Getting the PCM reprogramming is about the best. The IAT is far better than probably any Jet product from what I understand.
|
Mark16q
Dodge Dakota
JOIN HERE
1/25/2002
15:08:59
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Sounds like you did a great job of installing. Would love the pic's ridgebro@pacbell.net
But more importantly, what do you think?
Mark
|
jj
Dodge Dakota
JOIN HERE
1/25/2002
15:38:28
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Me to Bill ,jojojojo57@hotmail.com
|
2THEXTRM
GenIII
1/25/2002
17:56:33
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
I'll take at look at dem der picks too Bill. Gonna be putting in IAT before springtime hits. Thanks!
bobolama@altavista.com
Flowmaster stainless cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5" block lift, 33x11.50-16's, Superlift Truspeed Recalibrator
Powerslot Rotors, Ceramic Brake Pads
|
xplikt
Dodge Dakota
JOIN HERE
1/25/2002
18:33:10
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Wow, I knew I shouldn't have put this off, Bill gave me permission to post these for you all so he doesn't get flooded anymore...
(click the image if you want to see a larger view)
|
xplikt
Dodge Dakota
JOIN HERE
1/25/2002
18:55:19
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
My apologies to the people with 56Ks BTW..
|
Bill in NY
Dodge Dakota
JOIN HERE
1/26/2002
08:57:53
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Hey very good pics! ho, ho,ho........
Bill in NY
|
2THEXTRM
GenIII
1/26/2002
10:41:24
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Thanks for the pics Bill!! Good Work, like the stealth install should be a piece of cake when I do it now.
Flowmaster stainless cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5" block lift, 33x11.50-16's, Superlift Truspeed Recalibrator
Powerslot Rotors, Ceramic Brake Pads
|
MikeBrown
Dodge Dakota
JOIN HERE
1/03/2004
16:22:26
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
I have a 03 OC 4.7. I am wondering where i can get an IAT adjuster box.
|
OLD POST
Dodge Dakota
JOIN HERE
1/06/2004
01:10:45
| RE: '01 4.7L QC IAT adjuster installed
IP: Logged
Message:
Jeez the post is 2 years old
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
