| From | Message |
mike
Dodge Dakota
JOIN HERE
1/23/2002
13:45:27
|
 Subject: lakewood traction bars installation
IP: Logged
Message:
i want to get a pair of lake..... traction bars but i heared you have to weld and make many mods is this true. Also is there a notiable traction gain when installing these.
|
alex
Dodge Dakota
JOIN HERE
1/23/2002
14:01:42
| RE: lakewood traction bars installation
IP: Logged
Message:
No No No. They just clamp on over the leaf springs. They cost $38 at AutoZone and they install in about an hour. There ain't much improvement in traction until you go to the dragstrip. On the street, you won't notice anything except reduced wheel hop.
|
Rond
Dodge Dakota
JOIN HERE
5/27/2003
19:40:50
|  RE: lakewood traction bars installation
IP: Logged
Message:
What way do i install my lakewood traction bars (what way do they face)?
|
MEaTWIT2
Dodge Dakota
JOIN HERE
5/27/2003
20:41:20
| RE: lakewood traction bars installation
IP: Logged
Message:
The right way!
|
Lab Rat
GenIII
5/27/2003
22:20:00
| RE: lakewood traction bars installation
IP: Logged
Message:
With the bar towards the front. Hope you didn't get the standard universal model, they are too short and can actually damage your springs. Get the heavy duty ones.
|
Anthony
Dodge Dakota
JOIN HERE
5/13/2011
02:29:36
| RE: lakewood traction bars installation
IP: Logged
Message:
Hey I have a 69 camaro and these universal traction bars don't fit because of my shock they're in the way did any one have a problem like this and if so could you tell me how to fix it
|
psssst
Dodge Dakota
JOIN HERE
5/13/2011
15:24:24
| RE: lakewood traction bars installation
IP: Logged
Message:
you've got the wrong ones
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
