| From | Message |
brianldm
Dodge Dakota
JOIN HERE
1/14/2002
14:07:08
|
 Subject: RT concerns
IP: Logged
Message:
I am planning on lowering my 99 RC RT with the DJM 3"-5" drop. But I dont know if it will work. If the factory lowering uses -1" control arms then the DJM setup wont help me any. It will only lower 2". If its lowered by coils then I will end up with a 4"-6" drop.
Does anyone know how the 99 RT's came lowered from the factory?
Brian
99 RC RT
|
Duner
Dodge Dakota
JOIN HERE
1/14/2002
14:34:40
|  RE: RT concerns
IP: Logged
Message:
The R/T is lowered with a change of springs. All of the control arms are the same.
|
brianldm
Dodge Dakota
JOIN HERE
1/14/2002
14:40:05
| RE: RT concerns
IP: Logged
Message:
so if I lower it with a western chassis 2"-4", which uses a-arms and shackle & hanger, it will look like I have a 3"-5" because the coils add the extra inch? Is this true?
Thanks for the help
Brian
Anyone with a RT have pics with a DJM 3"-5" drop?
|
Duner
Dodge Dakota
JOIN HERE
1/14/2002
14:48:49
| RE: RT concerns
IP: Logged
Message:
Yes, if you use the R/T springs, it will be lower than if you used the sport springs..... so theoretically it will be 4"-6", or pretty friggin' low.
Somebody else has bound to have done this already. I'm sure pics won't be too far away.
|
brianldm
Dodge Dakota
JOIN HERE
1/14/2002
16:55:05
| RE: RT concerns
IP: Logged
Message:
Thanks again for the help.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
