From | Message |
RizeAbuv Dodge Dakota JOIN HERE
1/13/2002 16:06:29
|
Subject: TPS Incident IP: Logged
Message: I did the TPS adjustment today and it did work the response is much better but I got the code
P0123
Throttle position sensor input above the maximum acceptable voltage (shorted hig
Did I do something wrong I set the voltage at .73 on the meter IS this normal?? Its on a 2001 3.9 CC. Any help would be once again greatly appreciated.
Bryan
|
JimB GenIII
1/13/2002 16:09:49
| RE: TPS Incident IP: Logged
Message: Let me ask this one again, I posted before but never received a response. To obtain the code - you turn the key ON (all the bells ring) and OFF three times. Correct?? I have done this on both my trucks and all I get are numbers on the odometer. If someone could go through this step-b-step, I'd appreciate it. RIZE -- I am sorry I can't help you my friend. - Jim
99 SY 3.9 Dakota Sport 99 PB 5.9 Durango SLT
|
SMITTY2 Dodge Dakota JOIN HERE
1/13/2002 19:36:12
| RE: TPS Incident IP: Logged
Message: Don't wait for the bells. Just on and off three times. On the third time leave it on and it should run the test and show the code. Hope that helps.
|
jjj Dodge Dakota JOIN HERE
1/14/2002 19:33:33
| RE: TPS Incident IP: Logged
Message: Did you clear the pcm after the adjustment but before starting the truck. If not it will remember the original min. tps setting I think. Don't have the DRBIII here to check.
Jeff
|
robert Dodge Dakota JOIN HERE
1/14/2002 21:37:47
| RE: TPS Incident IP: Logged
Message: Try resetting the pcm. i got a code when i did mine too, but i think it was because i wasn't paying attention and took the clip off before taking out the key. reset the pcm and i'm back in business
|
HSKR Dodge Dakota JOIN HERE
1/15/2002 00:32:00
| RE: TPS Incident IP: Logged
Message: JimB, you can't check the codes that way on the '98-'99 trucks.
Only '00 and newer
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|