Forums
Forum Tools
|
 |
07:22:54 - 11/17/2024
General Dakota Board
| From | Message |
Tim R.
Dodge Dakota
1/02/2002
04:13:37
|
 Subject: door jamb switch
IP: Logged
Message:
My 96 Dak that I just got has a problem. The interior light does not come on when the driver's door is opened but it does when the passenger door is opened. Any quick&dirty fixes for this? Must be a bum switch. Is it easily replaced?
Thanks!
Tim R.
|
2THEXTRM
GenIII
1/02/2002
08:56:28
| RE: door jamb switch
IP: Logged
Message:
I never really paid attention to what kinda door switch my 01 Dak has, but if you have a mechanical switch(the kind you can push in with your finger to turn the dome light on and off), blast the hell out of it with electrical contact cleaner and then some WD-40, if that doesn't work, it should be cheap and easy to replace anyway. They usually thread into chassis and are easily removed with a deep socket or wrench and then unplugging the wire off the back without letting it go back through hole! If it is a contact switch where there is a piece on the door and piece mounted to cab that touch together when door is shut, they are very reliable and could be an electrical problem:( You could take both sides apart and also spray with electrical cleaner which may work, before trying to trace down the problem.
Flowmaster stainless cat back, Air Raid CAD and homemade TB connect, Splitfire Plugs, 33x11.50-16's
|
Tim R.
Dodge Dakota
1/02/2002
12:13:46
|  RE: door jamb switch
IP: Logged
Message:
Thanks, 2! I'll check it out as you say.
Tim
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
