| From | Message |
5point2
Dodge Dakota
12/21/2001
00:39:21
|
 Subject: Removing Rear Window
IP: Logged
Message:
Hey
I came across a sliding rear window and was looking to upgrade from the solid one that i have now. It is in a junk yard and it will be cheaper if i remove it myself can anyone tell me how to remove it. I will have it installed professionally to avoid leaks. It is in a gen3 CC
Any help greatly appreciated.
Mark
|
Troy
Dodge Dakota
12/21/2001
09:22:43
|  RE: Removing Rear Window
IP: Logged
Message:
Alot of times you can just cut the weatherstrip around the glass, and push the glass through. It may be a little tough, depending on how much glue/ adhesive is on the glass. Just don't pry on it with anything metal, etc. It will break for sure!!
|
5point2
Dodge Dakota
12/21/2001
14:00:58
| RE: Removing Rear Window
IP: Logged
Message:
But i saw in previous post that the entire rear interior panels of the truck need to be removed to remove the window. Can any one elaborate on this.
Thanks for the reply.
Mark
|
Art
Dodge Dakota
12/21/2001
14:49:53
| RE: Removing Rear Window
IP: Logged
Message:
You remove the panels to instal but since your gettin it from a yard dog just cut the weatherstrip around window with a razor blade,when your yard doggin your priority is just get your part out who gives a F what you do to the donor car
|
2WD91
Dodge Dakota
12/22/2001
00:16:38
|  RE: Removing Rear Window
IP: Logged
Message:
Allow me to tag onto this thread. I want to do the same thing to my 91 2WD which is off course a Gen2. I already have a new rear slider and want to remove the one piece. Advice solicited.
|
94DAK
Dodge Dakota
12/22/2001
07:44:33
| RE: Removing Rear Window
IP: Logged
Message:
If you will turn your atention to the Febuary 2002 (well that is what th covers says the year and date are) edition of "Truckin'" page 191. There is an artical about removing your rear window. Please keep in mind that the article ia about a cheby not a Dodge, but it shouldn't be that much different, should it? anyway good luck
|
Rob454
Dodge Dakota
12/23/2001
03:29:37
| RE: Removing Rear Window
IP: Logged
Message:
You need to use a razor knife to cut the polyglue holding the window in from the inside. Get a good sharp blade on there, and make a longer handle to give you leverage. then cut it. you shoud be able to push the window out. have a buddy help hold th window so you odnt drop it
Rob
|
5point2
Dodge Dakota
12/28/2001
00:36:10
| RE: Removing Rear Window
IP: Logged
Message:
Thanks for all the replys
Do any of you know what i should expect to pay to get the slider installed.
Mark
|
Jay
Dodge Dakota
JOIN HERE
1/09/2003
20:46:11
| RE: Removing Rear Window
IP: Logged
Message:
What are you doin with the old one? Wanna sell it to me? my zip is 85323
|
Jay
Dodge Dakota
JOIN HERE
1/09/2003
20:46:21
| RE: Removing Rear Window
IP: Logged
Message:
What are you doin with the old one? Wanna sell it to me? my zip is 85323
|
JB
Dodge Dakota
JOIN HERE
3/18/2004
14:16:51
| RE: Removing Rear Window
IP: Logged
Message:
Can i replace the sliding part of the window on my '92 dakota without replacing the whle window?
|
3point9
Dodge Dakota
JOIN HERE
5/29/2011
09:33:31
|  RE: Removing Rear Window
IP: Logged
Message:
no you have to replace the whole back window the
rear slider is all one piece from the factory. its
all made together there is no way to take it apart.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
