Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:24:15 - 12/20/2024

General Dakota Board
FromMessage
Lou Muscella
Dodge Dakota
 Email

12/19/2001
11:25:17

Subject: Tires size
IP: Logged

Message:
I need to put new tires on my Dakota and would like to put bigger tires then the 31x10.5 on it now. Does anybody know if the 32x11.5 will fit? I don't want to install a lift kit just looking to fill the wheel wells without rubbing. Any thoughts?



Wayne D.
Dodge Dakota
 Email

12/19/2001
12:38:42

RE: Tires size
IP: Logged

Message:
Just curious, Assuming the 31X10.5 worked ok, how must lift did you get with them? And how much gain will the extra 1" add (31X10.5 vs 32X11.5)? My stock tires are 255/65 16s.(29") Are you considering selling the old rims and tires?



Troy
Dodge Dakota
 Email

12/19/2001
13:45:07

RE: Tires size
IP: Logged

Message:
If you have the factory wheels (7" or 8"), and have a 4x4, 32x11.50's will fit. You may have slight rubbing on the frame at full lock, but nothing major. You can make steering stops to prevent this if it happens. I had 32x11.50 BFG's on a '99 with the factory 8" wheel, and had this rubbing problem. I had the same wheel/ tire on '00 with no rub. So I guess it just depends. This size tire looks great, and should work just fine. Hope this helps.

2000 QC 4x4 5.9L 3.92LS, every factory option
equal-length headers and larger y-pipe
Magnaflow single in/ dual out
Autolite 3923's, indexed
Kenne Bell (Taylor) wires
180 stat
Redline Water Wetter
S-bolt
Homemade 4" cold-air induction
K&N air filter
Mobil 1 and Purolator
Map sensor mod
adjusted TPS from .568 to .755




Lou Muscella
Dodge Dakota
 Email

12/19/2001
14:35:41

RE: Tires size
IP: Logged

Message:
I guess I should be more specific. I have a 98 Dakota 4x4 CC with the 5.2 V8. I have the factory wheels that come with the 31x10.5 tires. No, I am not interested in selling them, I just want to put bigger tires on without rubbing. Thanks for the info Troy.



Troy
Dodge Dakota
 Email

12/19/2001
16:19:36

RE: Tires size
IP: Logged

Message:
Lou,
If your truck came with 31x10.50's from the factory, you have the 15"x8" wheels. You should have no problems with 32x11.50's other than the slight rub I referred too. It is very slight, and only happens at full lock. If you don't want to deal with this rubbing, I would recommend staying with a 31-inch tire, in either 10.50 or 11.50 width. My .02 cents.



Rob454
Dodge Dakota
 Email

12/23/2001
03:45:03

RE: Tires size
IP: Logged

Message:
For anyone here I jsut put soem 33 mud terrains on my STOCK 2000 dakota 4x4. it has the heavy duty frotn suspension ( window sticker option) and the only place they rub is the fornt lower air dam corner. I jsut trimmed it. otherwise unless you do a complete full tight turn they dotn rub. and I use my truck off road and it looked great. I went back to the 31s, but the gas mielage doesnt seem any different. i did notice a slight power loss at take off
Rob



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.