From | Message |
Marc Dodge Dakota
12/03/2001 16:24:38
|
Subject: Splitfire wires/plugs IP: Logged
Message: Just wondering, are has anyone had any experience with Splitfire wires and/or plugs on their daks, or any other vehicle for that matter??
Thanks
|
joe Dodge Dakota
12/03/2001 18:32:26
| RE: Splitfire wires/plugs IP: Logged
Message: I had put splitfire plugs on my 97 dak and it caused the engine to vibrate. I got rid of the plugs. I checked the gap and made sure that the plugs were not broken.
|
2THEXTRM GenIII
12/03/2001 18:37:30
| RE: Splitfire wires/plugs IP: Logged
Message: I installed Splitfire Plugs in my 01 4.7 and gapped them at .046(They recommend .044) with great results, my idle is smoother and my mileage has increased just slightly. No Vibration detected after install like Joe was having.
Flowmaster stainless cat back, Air Raid CAD and homemade TB connect, Splitfire Plugs, 180 T-stat, .76 TPS, 3
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|