| From | Message |
josh
Dodge Dakota
10/24/2001
08:05:58
|
 Subject: more hight for yor 2wd daks!
IP: Logged
Message:
who is all interested in getting more hight out of their 2wd daks? that way i can get with AIM, so maybe they will speed up the process of this new cradle system i came up with. if you don't respond here just email me. thank you and have a good day.
josh smith
tx_smith_jd@yahoo.com
|
Mike
Dodge Dakota
10/24/2001
13:36:59
|  RE: more hight for yor 2wd daks!
IP: Logged
Message:
I'm very interested in more height.
mike
la grande, or
'00 sport, v6, 5 speed
|
Dodge Dakota
10/24/2001
16:26:23
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
im interested
|
josh
Dodge Dakota
10/25/2001
20:01:33
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
just leave ya's email addresses and i'll email ya some info on this subject. sorry about that, i forgot to put that.
|
Dodge Dakota
10/25/2001
23:30:55
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
srfsno4104@aol.com
|
Dodge Dakota
10/25/2001
23:31:14
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
srfsno4104@aol.com
|
mike
Dodge Dakota
10/26/2001
01:58:20
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
dakotart_99@yahoo.com
|
bernd
*GenIII*
10/26/2001
09:22:10
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
All i'll say to this thread is: FabTech.
I ran the Fabtech 3" Suspension Lift with a Performance Accessories 2" Body Lift and 32" BFG's. That combination puts you almost 2" above a factory 4x4. (With much more clearance up front.)
The truck is lowered now but i've put together a 'Before and After' picture:
http://www.speedtweaks.net/images/New_Look/Before_After.jpg
1997 Dodge Dakota SLT - V6
Supercharged @ 10# w/Nitrous
|
Mike
Dodge Dakota
10/26/2001
11:46:28
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
Bernd, was the Fabtech lift hard to install? I just ordered the kit and I'm also going to try and put it on myself (with some help from a friend). Is there anything (tips/tricks) I should know before I install it?
|
bernd
*GenIII*
10/26/2001
13:55:29
| RE: more hight for yor 2wd daks!
IP: Logged
Message:
The hardest part was the front coils from Fabtech. They're a @#$! to compress.
Word of caution: You WILL need different rims as the Fabtech kit requires a maximum of 3.75" backspacing on the rims to fit the new control arms. I found out the hard way after finishing it up on a late Friday evening...factory rims rubbed on the upper control arms and I had to make a quick run to San Antonio to get a set.
1997 Dodge Dakota SLT - V6
Supercharged @ 10# w/Nitrous
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
